Ratty2Austin Posted September 28, 2003 Share Posted September 28, 2003 so I guess I need to buy the 5 spd conversion from Pat and Jerry! (and dont you guys have that place in yakama that does the cheap driveshaft lengthening?? the 4 spd in my wagon is making horrible grinding noised when driving in 1st and 2nd gears...! arrrg! so i guess i will be heading out to Moxee motors sometime soon! (before winter is too much apon us) Link to comment Share on other sites More sharing options...
SuperRallyRoo Posted September 28, 2003 Share Posted September 28, 2003 And I need to come too! Cause I need my shaft lengthened as well. But not as badly as u do. j.k;) Link to comment Share on other sites More sharing options...
syphon Posted September 29, 2003 Share Posted September 29, 2003 drop a TH350 in there, I dare ya :-) Link to comment Share on other sites More sharing options...
bratsrus1 Posted September 29, 2003 Share Posted September 29, 2003 Hey Austin This is Jerry, let me know a head of time so i can build a kit up for your wagon. I will have to check to see if i have enough parts to build 1. Let me know Thanks Jerry Link to comment Share on other sites More sharing options...
Ratty2Austin Posted September 29, 2003 Author Share Posted September 29, 2003 I am ready whenever you are- i just need to know what i need to bring down to you for the driveshaft, and how much money and what its all gonna run me- i need this wagon to run good! (it is going to be my main ride!) thanks Link to comment Share on other sites More sharing options...
bratsrus1 Posted September 30, 2003 Share Posted September 30, 2003 Hi Austin This is Jerry, i need to see if i got enough parts to make up a kit. The drive line i have the drive line shop make them up and on a wagon i don't know if it is the same as the brat. i will look tomorrow and let you know. Can you find out if the wagon and brat rear drive line is the same legnth. Thanks Jerry Link to comment Share on other sites More sharing options...
reoff Posted September 30, 2003 Share Posted September 30, 2003 I'll be going over to visit Jerry in the next couple weeks... Let me know if you guys can work it out. I'll bring the stuff back for you if you want. If you want to come too, let me know Austin. Rich Link to comment Share on other sites More sharing options...
Ratty2Austin Posted October 1, 2003 Author Share Posted October 1, 2003 the brat and wagons are the same length when it comes to the driveshaft- so if youve got the measurments from Ed's brat still- it is the same thanks Link to comment Share on other sites More sharing options...
bratsrus1 Posted October 1, 2003 Share Posted October 1, 2003 Hey Austin This is Jerry, if you are right then you will need 51 inches of new tubing installed in your wagon drive line. In yakima there is a place called Drive Line Service and that is the place that did Eds and mine. It cost 130.00 to install new tubing and balance it on Eds drive line he wanted new u joints and his cost 165.00 just to let you know. When you come over you need to bring the 5 speed shifter and the 5 speed tranny mounts all 3 of them. I will get started on the kit tomorrow. Thanks Jerry Link to comment Share on other sites More sharing options...
Subafly Posted October 1, 2003 Share Posted October 1, 2003 So do you need a five speed Austin? The one I took out of my Loyal when I put in the D/R is just sitting around if you need it let me know It worked when I took it out but it grings when shifting into second really fast. Like when your doin this:burnout: Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now