peejay Posted October 25, 2005 Share Posted October 25, 2005 Hi all, I'm on the middle of an EJ20T conversion for my RX turbo and I need a pinout for the old EA82T computer. It is the 3 plug type. There was one on the Ausubaru site before the webhost went bust but it's not there now!! GRRRR!!! Any help will be greatly appreciated!!!!! Quote Link to comment Share on other sites More sharing options...
hooziewhatsit Posted October 25, 2005 Share Posted October 25, 2005 I believe the EA82 part 2 pdf from here *should* have the pinouts you seek, it will be toward the end of the pdf. http://www.finleyweb.net/default.asp?id=142 Quote Link to comment Share on other sites More sharing options...
gravilboy Posted October 25, 2005 Share Posted October 25, 2005 what was rong wif da ea82t i jst blew mine up Quote Link to comment Share on other sites More sharing options...
peejay Posted October 29, 2005 Author Share Posted October 29, 2005 My old EA82T got dunked a bit too deep and no longer runs.... Those diagrams are the newer 4 pin type for the MPFI engine. The one I need is the older one. Thanks anyway:) Quote Link to comment Share on other sites More sharing options...
Subi81 Posted October 29, 2005 Share Posted October 29, 2005 From the 86 FSM Let me know if you need the more schematic looking one Quote Link to comment Share on other sites More sharing options...
gravilboy Posted October 30, 2005 Share Posted October 30, 2005 My old EA82T got dunked a bit too deep and no longer runs.... Those diagrams are the newer 4 pin type for the MPFI engine. The one I need is the older one. Thanks anyway:) so how esy dos the ej20 fit in the engin bay cos som1 told me they match up 2 the ea82 gearbox im thinkin it might b a good idea bit mor power dats al Quote Link to comment Share on other sites More sharing options...
bushbasher Posted November 2, 2005 Share Posted November 2, 2005 ej20 doesnt match up to the ea82t transmission. You need to make or buy an adapter plate. Quote Link to comment Share on other sites More sharing options...
peejay Posted November 2, 2005 Author Share Posted November 2, 2005 Thankyou, that was the one I was after! Yeah, EJ20 needs an adapter plate to mate with an EA gearbox. It's not too hard to make. There used to be a section in the Ausubaru tech manual on how to do it, I assume it will be back soon. EJ20 fits in an L series no dramas. The only thing I had to do was grind the locating stubs off the engine mounts. Quote Link to comment Share on other sites More sharing options...
NoahDL88 Posted November 2, 2005 Share Posted November 2, 2005 so how esy dos the ej20 fit in the engin bay cos som1 told me they match up 2 the ea82 gearbox im thinkin it might b a good idea bit mor power dats al :-\ Can I buy a vowel? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.