brumbyboy Posted November 6, 2005 Share Posted November 6, 2005 can anyone help me with a wiring diagram to put a ea82t out of a vortex so my brumby has a bit more zing Link to comment Share on other sites More sharing options...
NoahDL88 Posted November 6, 2005 Share Posted November 6, 2005 For us Yanks, the vortex is the XT right, or is the Alcyone the XT? I have both the 88XT and the 87RX manuals, i should be able to get a picture of the pages that you need. but there might already be some pdf files on the web somewhere. Link to comment Share on other sites More sharing options...
brumbyboy Posted November 9, 2005 Author Share Posted November 9, 2005 from what i understand and have read on this site yes. i'm not sure which of the models you quoted. i bought a half cut from the importers, and the description they gave it was an ax7 alcione. the set-up in the car is es82t with 5 sp full time 4wd with an electronic diff lock. For us Yanks, the vortex is the XT right, or is the Alcyone the XT? I have both the 88XT and the 87RX manuals, i should be able to get a picture of the pages that you need. but there might already be some pdf files on the web somewhere. Link to comment Share on other sites More sharing options...
calebz Posted November 9, 2005 Share Posted November 9, 2005 Then its likely an 87+. Hotwire type MAF? Somewhere around here is a scan of the 89 GL FSM.. it has the diagrams you seek.. If I can find it, I'll post the link Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now