offroadsubaruguy Posted November 8, 2005 Share Posted November 8, 2005 does anyone know what the svx spline count for the axels is? and are the front control arms any different? im trying to come up with a way to make my legacy wider, but not having any luck, so figured i'd try this route, but i dont have access to a svx...... Link to comment Share on other sites More sharing options...
X35 Performance Posted November 8, 2005 Share Posted November 8, 2005 On the transmission end, they are the same, not sure about the outboard end though.. Link to comment Share on other sites More sharing options...
benebob Posted November 8, 2005 Share Posted November 8, 2005 Well my mechanic has used Legacy axles in SVXs as the rebuilder he used retired and he can't find a reliable source. It fits right in there so my guess is it isn't any wider or its only a slight bit that the axles are swappable. If you want a little wider track what about some spacers between the wheel and hub? Should be able to go about a 1/2 inch on either side without getting longer lugs. Link to comment Share on other sites More sharing options...
offroadsubaruguy Posted November 9, 2005 Author Share Posted November 9, 2005 i had thought of spacers, but i dont want to prematurely wear out the wheel bearing....... i might just have to space them anyway as the tires i want to run arent going to fit unless i do...... Link to comment Share on other sites More sharing options...
benebob Posted November 9, 2005 Share Posted November 9, 2005 i had thought of spacers, but i dont want to prematurely wear out the wheel bearing....... i might just have to space them anyway as the tires i want to run arent going to fit unless i do...... spacers should be just fine. Got ours from summit racing. Still trying to get 275s on our svx. Link to comment Share on other sites More sharing options...
offroadsubaruguy Posted November 9, 2005 Author Share Posted November 9, 2005 im going more for 31x10.50's, but thanks for the info guys!! and good luck with those 275's.... Link to comment Share on other sites More sharing options...
jamal Posted November 9, 2005 Share Posted November 9, 2005 How about using newer Impreza sedan (02+) control arms/lateral links/axles? I think all you need to do is cut off a bit of a bushing on the control arms. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now