Jump to content
Ultimate Subaru Message Board

Hitachi water choke, reduntant with webber


Recommended Posts

I found a small coolent leak where the coolent is fed up into the manifold just below front of carb for the hitachi's water choke. instead of replacing this hose (a bit orcward) could i just block it where it tee's off the heater hose hard line, as i no longer need coolent there with my webber.

 

Does anyone know if this section seperate to the main crossover channel for the coolent in the manifold?

Link to comment
Share on other sites

That small tube that the hose connects to on the manifold, goes into a passage to the coolant jacket. If you removed the carb, you'd see a 12-13mm square hole, and the end of that tube. You would have to block both ends of where the hose attaches, so you might as well replace hose.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...