Shadyirishmen Posted November 16, 2005 Share Posted November 16, 2005 ATTENTION: ALL PRICES HAVE BEEN LOWERED TO AN ALL TIME LOW. This group buy includes everything we make and distribute Lift Kits, Wheels, Skid Plates, New Bumpers (not pictured yet), EA to EJ adapters most products are in stock and will be marked as so. Please Read Everything: Whoever is interested in buying a brand new manufacture Subaru lift kit, Set of 15x6 wheels, Bumpers (front or rear), and EA EJ adapters. for a discounted price manufactured by Allied Armament (except for the EA EJ adapters) this is the OFFICIAL Christmas GROUP BUY. Scroll down to see each group buy Lift Kits: The lift kits are made of steel and the majority of parts are laser cut quarter inch thick. Our tranny lift components are unitized (instead of individual tubes that are known to bend captive nuts), they are parkerized and painted with Hammerite hammered paint and are guaranteed free of manufacturing defects (cracking, bending, etc.), and come with a 5 yr warranty. (there is now a steering core exchange included you can save $10 if you exchange your old steering shaft) This group buy will be open till DECEMBER 16th, and the pricing goes as follows. (All purchases count towards the group buy discounted price for each product, I.E. 5 Lift kits sell than puts the lift kit Category in the second tier of pricing. Two EJ adapters sell than that puts that product in the next tier pricing). ALL LIFTS ARE AVAILABLE IN 4” versions only Pictures http://alliedarmament.homestead.com/LiftKit.html EA 81 Standard Lift: Lowers front and rear sub frame equally. No axle strain includes rear brake lines (had to raise price $10 to accomodate extra costs). (bolt on kit) (20 in stock) (dont forget send your old steering shaft in and save $10) 1-5 people on group buy $360 6-10 people on group buy $345 11-15 people on group buy $ 330 16-20 people on group buy $ 320 EA 82 Moderate clearance lift: Lift is built using standard front lift that lowers the whole front sub assembly and keeps stock axle geometry in the front. The rear of the lift is lifted via the top of the strut 3” inches (same rear lift on 4” and 3” lifts) and uses a 1” mustache bar lowering block. LIFT WILL KEEP YOUR TIRES CLOSER TO THE CENTER OF YOUR WHEEL WELLS IT IS NOT LIKE OUR HIGH CLEARANCE LIFT. This lift adds some strain to the rear axles but has proven dependable on the rear axles for over 10 thousand miles, unlike competitors lifts this lift will keep your rear end tucked up tightly so that you have more clearance and protection under your rear sub assembly. This lift will provide dependable drivability and superior offroad performance. This is our most affordable lift kit and comes highly recommended by our CEO. (Bolt on kit) (20 in stock) (dont forget send your old steering shaft in and save $10) 1-5 $ 345 6-10 $ 335 11-15 $315 16-20 $305 High clearance lift: (4” lift only) Lift is built using standard front lift that lowers the whole front sub assembly and keeps stock axle geometry in the front. The rear of the lift is lifted via the top of the strut 4” inches and uses a 1” mustache bar lowering block. This lift adds excessive strain to the rear axles but has proven dependable, unlike competitors lifts this lift will keep your rear end tucked up tightly so that you have more clearance and protection under your rear sub assembly. This lift is for the purest and provides superior offroad performance. (Numbchux has this lift and has written about it). (Botl on Kit). (20 in stock) (dont forget send your old steering shaft in and save $10) 1-5 $ 345 6-10 $ 335 11-15 $325 16-20 $315 EJ EJ series lift: This is the newest addition to the allied Armament family. We have fitted it to Outback Wagons and Legacy sedans. It comes as 2.5” lift for the outback and 4” lift for the Legacy. It retains stock geometry in the front and adds minimal strain in the rear (almost none). It is based on lowering front and rear struts via strut extensions and lowering blocks for front and rear sub assemblies. We are unsure if this lift will fit on the Imprezza model and newer model outbacks (2000 and newer). If people are interested they can bring there vehicle to our shop and have one fitted to these two types of vehicles and they can join in on the group buy. (We are located in Scappoose OR.) (bolt on) contact for pictures (1 in stock) (dont forget send your old steering shaft in and save $10) 1 $485 2 $455 second purchase will have to wait for manufacturing to build more 3 $445 ditto Shipping is not included in this price. Shipping is $20 for the lift kits Allied Armament 15x6 4 lug wheels for EA series vehicles: (9 sets of four in stock extras are available at individual discount price) 8 sets black 1 set white Pictures: http://alliedarmament.homestead.com/Wheels.html 1-3 sets: $290 4-6 sets: $275 7-9 sets: $265 10 and above: $260 tenth buyer and above have to wait a month for more to be produced. EA to EJ Adapters: (4 in stock) Pictures: http://alliedarmament.homestead.com/EAEJ.html 1 set: $175 2 sets: 170 3 sets: 165 4 sets and above: 160 Skid Plates for lifted Roos: We found that this version is perfectly fine we can place a jack under it and lift the car. The only difference between the picture and the new one is. There is more area cut out for the sending unit, and there is buldge plate welded on Photos: http://alliedarmament.homestead.com/SkidPlate.html Prices: Stainless Steel/ and steel 1-5: $185 / $ 150 6-10: $175 / $140 11-15: $165/ $135 16-20: NA/ $120 Bumpers tube bumpers: (dual tube bumpers)(direct bolt on) EA 82 and EA81 if you buy a set there will be an additional $25 discount. http://www.ultimatesubaru.org/photos/showphoto.php?photo=9240&size=big&sort=1&cat=500 Front Bumper: 1-3: 249.99 4-6: $229.99 7-9: $215.99 9-12: $199.99 Rear Bumper: 1-3: 249.99 4-6: $229.99 7-9: $215.99 9-12: $199.99 Buy a set save an additional $25 Photos and pricing available 11/26/05 (fifty to be in stock) In order to buy please put a reply thread on this board with your email or screen name if interested or email me directly at malarkey2@aol.com. After we have contacted I will put your screen name on a list in this message. A $20 non refundable deposit must be made in order to be put on the list. Payment in full will need to be received before December 16th to be eligible. After December 16th the orders will be processed and and will take up to 10 business days for be processed and shipped. Any orders that are not filled and shipped by December 27th will be given a $25 dollar discount after January 7th if you order has not been shipped you will receive a 50% discount on the purchase price of your product unless otherwise specified wheels for one and lifts over 20 quantities of which will have to wait regardless. We guarantee quick delivery of our product, because we manufacture most in our shop there will most likely be no delays. Shipping is an added charge and shipments will be shipped from 55948 Columbia River HWY Scappoose OR. 97056 Please send all payments to CREDIT CARD: (503) 543-5154 Allied Armament P.O. Box 1186 Scappoose OR. 97056 Or Via Paypal by using our email address: Malarkey2@aol.com Thank You, James Malarkey CEO Allied Armament www.alliedarmament.com Link to comment Share on other sites More sharing options...
kingbobdole Posted November 16, 2005 Share Posted November 16, 2005 pics of the new and improved skid plate might convence me to buy it.... I have lots of your other stuff might as well get the skid plate... depending on how it looks and if the price is right:brow: Link to comment Share on other sites More sharing options...
idosubaru Posted November 16, 2005 Share Posted November 16, 2005 do the AA EJ lift kits modify the front struts at all? how about the EA82 lift kits, any front strut/suspension work? the XT6 can interchange rear struts with EA82 model soobs, so those attachments should work fine for the XT6. EA82 front struts do not swap with the XT6 though. this might be helpful to a few EA82 owners since some do the 5 lug suspension swap from the XT6. and - EJ series front struts will also swap with the XT6 so any EJ series strut mods should be compatible...depending what they are. that's why i ask. Link to comment Share on other sites More sharing options...
justified Posted November 16, 2005 Share Posted November 16, 2005 Just waiting for prices and pics of tube bumpers for my 87 Hatch before I commit. peskimeski@yahoo.com Link to comment Share on other sites More sharing options...
justified Posted November 16, 2005 Share Posted November 16, 2005 Also , need idea on shipping to 61554.. Link to comment Share on other sites More sharing options...
cmiller Posted November 16, 2005 Share Posted November 16, 2005 James, count me in for a skid plate for sure, and depending on prices, some of those fine tube bumpers would be sweet. Want to see pics and prices before I commit 100%. Link to comment Share on other sites More sharing options...
idosubaru Posted November 16, 2005 Share Posted November 16, 2005 someone moved my post? i was trying to get an answer on a question before cluttering up this thread. if there are 10 questions with 2 responses each you just ended up with 20+ replies.... Link to comment Share on other sites More sharing options...
Harvester Posted November 16, 2005 Share Posted November 16, 2005 Count me in for the EA81 Lift Kit. Link to comment Share on other sites More sharing options...
Shadyirishmen Posted November 16, 2005 Author Share Posted November 16, 2005 we make strut extensions for both the EA 82 and EJ, also rear strut extensions are made for the ej, The ea's gets a rear strut extension but it is different than the EJ's. From the sounds of it with a little mixing and matching we can make a lift for the Xt6. I need to get those pictures up pronto. Link to comment Share on other sites More sharing options...
Shadyirishmen Posted November 16, 2005 Author Share Posted November 16, 2005 Current list Skid Plates: 2 maybe Kingbobdole: Maybe once pictures are up Cmiller: Maybe once pictures are up Bumpers: 2 maybe Justified: Once pictures are up Cmiller: Maybe once pictures are up Lift Kits: 1 for sure Harvester: EA 81 lift kit Link to comment Share on other sites More sharing options...
idosubaru Posted November 17, 2005 Share Posted November 17, 2005 thanks shady, so the EJ lifts include a front strut extension to the top or bottom? can you post a picture of how this extension attaches to see if it'll fit the XT6 strut and i'll verify if the EJ struts bolt up or require swapping strut tophats. looks like EJ front strut extensions and EA rear strut extensions will work. (i know nothing about lifts). any diff hardware for the EA series should work. what else is there...transmission or engine hardware too? Link to comment Share on other sites More sharing options...
Numbchux Posted November 17, 2005 Share Posted November 17, 2005 what else is there...transmission or engine hardware too? yep, blocks between the engine crossmember and body, and more between the radius rod bracket/tranny crossmember and body shady, you know I'll be getting front bumper from you....just depends on the style maybe a swing gate too...if you're still doing those. Link to comment Share on other sites More sharing options...
Shadyirishmen Posted November 17, 2005 Author Share Posted November 17, 2005 bump. Link to comment Share on other sites More sharing options...
offroadbryan Posted November 18, 2005 Share Posted November 18, 2005 would be interested in a set a rims, but dont lock me in to them just yet Link to comment Share on other sites More sharing options...
offroadsubaruguy Posted November 18, 2005 Share Posted November 18, 2005 really wish i could get the ej-ea adapter and a lift, but seeing as i gotta save for the honeymoon, and for school, probably not gonna happen anytime soon.....:( Link to comment Share on other sites More sharing options...
Shadyirishmen Posted November 19, 2005 Author Share Posted November 19, 2005 Oh she won't mind! really wish i could get the ej-ea adapter and a lift, but seeing as i gotta save for the honeymoon, and for school, probably not gonna happen anytime soon.....:( Link to comment Share on other sites More sharing options...
offroadsubaruguy Posted November 19, 2005 Share Posted November 19, 2005 she did tell me my cars are mine, but i need to be able to make rent, buy groceries and pay bills before i get to play, so its going to be awhile...... Link to comment Share on other sites More sharing options...
Shadyirishmen Posted November 21, 2005 Author Share Posted November 21, 2005 I'm just making this post to find out what forum its in now. Link to comment Share on other sites More sharing options...
justified Posted November 21, 2005 Share Posted November 21, 2005 Any idea how much on those tube bumpers for my 87 hatch yet? I want to make sure I'll have enough cash and I dont get paid again til after the due date for payment. My Hatch doesn't have a rear bumper on it at all and the local cops are keeping an eye on me, so I def need one. Link to comment Share on other sites More sharing options...
Shadyirishmen Posted November 21, 2005 Author Share Posted November 21, 2005 .... Link to comment Share on other sites More sharing options...
Shadyirishmen Posted November 22, 2005 Author Share Posted November 22, 2005 ATTENTION: PRICES ON THE LIFT KITS HAVE BEEN LOWERED TO AN ALL TIME LOW. EA 81 Standard Lift: Lowers front and rear sub frame equally. No axle strain includes rear brake lines (had to raise price $10 to accomodate extra costs). (bolt on kit) (20 in stock) (dont forget send your old steering shaft in and save $10) 1-5 people on group buy $360 6-10 people on group buy $345 11-15 people on group buy $ 330 16-20 people on group buy $ 320 EA 82 Moderate clearance lift: Lift is built using standard front lift that lowers the whole front sub assembly and keeps stock axle geometry in the front. The rear of the lift is lifted via the top of the strut 3” inches (same rear lift on 4” and 3” lifts) and uses a 1” mustache bar lowering block. LIFT WILL KEEP YOUR TIRES CLOSER TO THE CENTER OF YOUR WHEEL WELLS IT IS NOT LIKE OUR HIGH CLEARANCE LIFT. This lift adds some strain to the rear axles but has proven dependable on the rear axles for over 10 thousand miles, unlike competitors lifts this lift will keep your rear end tucked up tightly so that you have more clearance and protection under your rear sub assembly. This lift will provide dependable drivability and superior offroad performance. This is our most affordable lift kit and comes highly recommended by our CEO. (Bolt on kit) (20 in stock) (dont forget send your old steering shaft in and save $10) 1-5 $ 345 6-10 $ 335 11-15 $315 16-20 $305 High clearance lift: (4” lift only) Lift is built using standard front lift that lowers the whole front sub assembly and keeps stock axle geometry in the front. The rear of the lift is lifted via the top of the strut 4” inches and uses a 1” mustache bar lowering block. This lift adds excessive strain to the rear axles but has proven dependable, unlike competitors lifts this lift will keep your rear end tucked up tightly so that you have more clearance and protection under your rear sub assembly. This lift is for the purest and provides superior offroad performance. (Numbchux has this lift and has written about it). (Botl on Kit). (20 in stock) (dont forget send your old steering shaft in and save $10) 1-5 $ 345 6-10 $ 335 11-15 $325 16-20 $315 EJ EJ series lift: This is the newest addition to the allied Armament family. We have fitted it to Outback Wagons and Legacy sedans. It comes as 2.5” lift for the outback and 4” lift for the Legacy. It retains stock geometry in the front and adds minimal strain in the rear (almost none). It is based on lowering front and rear struts via strut extensions and lowering blocks for front and rear sub assemblies. We are unsure if this lift will fit on the Imprezza model and newer model outbacks (2000 and newer). If people are interested they can bring there vehicle to our shop and have one fitted to these two types of vehicles and they can join in on the group buy. (We are located in Scappoose OR.) (bolt on) contact for pictures (1 in stock) (dont forget send your old steering shaft in and save $10) 1 $485 2 $455 second purchase will have to wait for manufacturing to build more 3 $445 ditto Shipping is not included in this price. Shipping is $20 for the lift kits Link to comment Share on other sites More sharing options...
Shadyirishmen Posted November 22, 2005 Author Share Posted November 22, 2005 ATTENTION: PRICES ON THE WHEELS HAVE LOWERED TO AN ALL TIME LOW. Allied Armament 15x6 4 lug wheels for EA series vehicles: (9 sets of four in stock extras are available at individual discount price) 8 sets black 1 set white Pictures: http://alliedarmament.homestead.com/Wheels.html 1-3 sets: $290 4-6 sets: $275 7-9 sets: $265 10 and above: $260 tenth buyer and above have to wait a month for more to be produced. Link to comment Share on other sites More sharing options...
Shadyirishmen Posted November 22, 2005 Author Share Posted November 22, 2005 ATTENTION: PRICES ON THE EA EJ ADAPTERS HAVE LOWERED TO AN ALL TIME LOW. EA to EJ Adapters: (4 in stock) Pictures: http://alliedarmament.homestead.com/EAEJ.html 1 set: $175 2 sets: 170 3 sets: 165 4 sets and above: 160 1-3 sets: $290 4-6 sets: $275 7-9 sets: $265 10 and above: $260 tenth buyer and above have to wait a month for more to be produced. Link to comment Share on other sites More sharing options...
Shadyirishmen Posted November 22, 2005 Author Share Posted November 22, 2005 THEY DON'T CALL IT CHRISTMAS FOR NOTHING!!! Link to comment Share on other sites More sharing options...
Numbchux Posted November 22, 2005 Share Posted November 22, 2005 bumpers? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now