JWX Posted October 2, 2003 Share Posted October 2, 2003 So, my clutch is going out in my hatch and I want to get one with more holding power then stock. Anybody know where I can get one? also I want to put the fulltime D/R center locking diff box in it. how would I do this and would jerry's kit(I think thats his name) help? Link to comment Share on other sites More sharing options...
JWX Posted October 4, 2003 Author Share Posted October 4, 2003 bump. Link to comment Share on other sites More sharing options...
bratsrus1 Posted October 4, 2003 Share Posted October 4, 2003 Hi JWX This is Jerry, want a stiffer clutch then install a 88rx clutch it is alot stiffer that stock. The kit that i build will fit your hatch. Now you are talking about center diff lock that is in rx trannys and they are turbo with 3.70 gears and the stub axles are bigger that stock. The tranny will fit but you will have to make custom axles for this project. Thanks Jerry Link to comment Share on other sites More sharing options...
JWX Posted October 4, 2003 Author Share Posted October 4, 2003 hmm I didn't think about that:rolleyes: . I wonder how hard that would be? Link to comment Share on other sites More sharing options...
MilesFox Posted October 4, 2003 Share Posted October 4, 2003 swap axles, or just the inner axle DOJ, change rear diff, too Link to comment Share on other sites More sharing options...
JWX Posted October 5, 2003 Author Share Posted October 5, 2003 I thought that would be all I had to do. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now