Lemme see those pics of your bumper/brush guard, skidplates

[ezapar]

I wanna add a post onto the FAQ that shows the different bumpers that have been put on a Soob, from factory, to aftermarket, to home fabbed.

Just post pics please, no conversation.

 

Any posts without pics, will be deleted....

 

Here's a page that Mick has put together. http://www.ultimatesubaru.org/80s/pushbar/pushbar.html

 

Thanks all.

[A DOG]

I designed this bumper then Allied Armament made it for me.

 

[spanky_pete]

There's a pic of the bumper that's on my wagon in this thread. I can supply you with a better one if wanted.

http://www.ultimatesubaru.org/forum/showthread.php?t=47750

[NoahDL88]

[TheSubaruJunkie]

 

Also Zap... here's a page i made quite some time ago with all the different guards offered for subaru. Of course, this was like 3-4years ago so there are no custom jobs. Feel free to rob the information and pictures if you'd like:

http://subaru4wd.usmb.net/Jan2002/aftermarket/guards.html

 

-Brian

[Matty B]

East Coast Bullbars

skid plate by Me.

[Shadyirishmen]

[Turbone]

A close up of the skidplate.

A not so close up of the front bumper.

[Jibs]

Factory Brushguard:

 

 

I might see if I can get a closer pic too.

[Ryanb]

That's how I roll! lol

 

 

[DrKrazy]

For an EA81 we decided in a different thread:

[Shadyirishmen]

New Allied Armament Bumper:

 

 

[Phizinza]

Got no idea where it came from. No idea who made it. All I know, is I like it

 

[superu]

Mudrat designs...

http://www.ultimatesubaru.org/forum/attachment.php?attachmentid=2466

'95 legacy, custom 1/8" steel skidplate...

 

I wanna add a post onto the FAQ that shows the different bumpers that have been put on a Soob, from factory, to aftermarket, to home fabbed.

 

Just post pics please, no conversation.

 

Here's a page that Mick has put together. http://www.ultimatesubaru.org/80s/pushbar/pushbar.html

 

Thanks all.

[RenaissanceMan]

Unfortunately this skid plate never went into play, but it sure looked cool on the rolling chassis (when it was a chassis)

 

-Mike

[MSSLGECKO]

This is a tube bumper by mudrat designs - john bloom. Pretty simple straight-forward design, one of his early tube bumpers as i recall.

[scoobyclimbs]

Here's a Mudrat Designs baja tube bumper on my '03 outback + a modified Primitive racing skidplate/bashplate.

 

 

 

 

[nicky nighteyes]

Old Bumper (now for sale in the marketplace)

New Bumper (more lights! much more)

I also have a skipplate but it needs a coat of paint before it is installed

[Adam N.D.J.]

Here's my Steely Del prototype push-bar deer guard. This is the best deer protection I've ever had. Not to mention people tend not to cut me off when they see it.

 

[monstaru]

still gattoa get a skid on there.......found this for 11 bucks at the yard,welded new mounts and am waiting to tuck those lights inside when i get driving lights and make the skidplate.

[subie94]

I wanna add a post onto the FAQ that shows the different bumpers that have been put on a Soob, from factory, to aftermarket, to home fabbed.

Just post pics please, no conversation. Thanks all.

 

well you did say stock.of course it's not stock for legacy(so in a twisted way it's aftermarket)

[Tin Soldier]

Here is what I have on my 4x4 roo at the moment. It got repaired after this pic was taken. I got stuck and hit a tree so it got banged up. It made using an original factory bumper with the plastic pulled off then we cut the center out using a sawsall so only the bracket where left with a 6" section of the bumper still attached. Then we stuck the large piece of 4 in Mack truck exhaust on it and welded it in place. Next we lined up the Chevy Blazer brush guard and eyeballed it then welded it in place. Lastly we put the 2" exhuast pipe on the bottom and welded it to the brush guard. I wanted to then bend the bottom up and weld it to the 4" pipe but never got that far. In this picture I have hit a tree and broke a couple of the bolts that hold it to the car and at least one weld. Had to to have my Brother in Law (welder by trade) fix it for me

 

[Scott in Bellingham]

Heres my new car

 

 

 

 

..

 

Just got it built , ready to try it out next weekend

 

 

.

[Numbchux]

ressurected for these pics of the custom 1/4" stainless steel skidplate that 95lwrx built for the PoopenVagon and another pic of the tube bumpers that MorganM and Archemetis built for it: