Gravityman Posted December 15, 2005 Share Posted December 15, 2005 Hey subaru freaks Has anyone heard of or tryed to mount 2 sway bars one directly on top of the other. I saw this i a book and said that you can do this instead of trying to find an aftermarket one or having one custom fabed. I would imagine that it would be tighter then a aftermarket SB, also if you wanted to remove one to loosen the roll you could. Sound cool, I hear an experiment coming. Link to comment Share on other sites More sharing options...
Tbird Man Posted December 16, 2005 Share Posted December 16, 2005 I don't see why it woulden't work. you could even try to rig a bowflex type system to fine tune the stiffness. Link to comment Share on other sites More sharing options...
Gravityman Posted December 16, 2005 Author Share Posted December 16, 2005 Bowflex heemmm?:-\ Link to comment Share on other sites More sharing options...
NoahDL88 Posted December 17, 2005 Share Posted December 17, 2005 There are already makers of adjustable sway bars, depending on which hole you put the end link in it makes it "stiffer" May be worth looking into, probably easier than connecting 2 sway bars together. Link to comment Share on other sites More sharing options...
Gravityman Posted December 17, 2005 Author Share Posted December 17, 2005 Easier but more cost effective? Link to comment Share on other sites More sharing options...
baccaruda Posted December 17, 2005 Share Posted December 17, 2005 that would be cool. for EA82 platform cars, there are 17, 18, 19, and 20mm front sway bars, and no 17 for the back. Lots of combinations available! Hope you can weld Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now