NoahDL88 Posted December 21, 2005 Share Posted December 21, 2005 So, as i'll soon be in the land of plenty (Seattle) I'm hopeing to find 2 transmissions, and a few random parts. I'd like to find a 5MT with 4.44 gears, along with a matching Rear Diff A N/A 5mt D/R with the 1.59 low range A LSD for the Front, i know this one is a pipe dream, but you never know. So, you ask, what pray tell is my plan? Front LSD 4.44 final drive RX center locking Diff 1.59:1 low range. now, putting this all behind a EJ22, and a locked rear end and who needs a "real" transfer case. Assuming this is feasable, and or do-able with out millions of hours of work, i'm sure i'd be happy enough to build these for the board. As of now i only know that the better low range can be swapped, so don't get your hopes up too high, and if anyone else wants to dive into this one, please by all means go to it. Link to comment Share on other sites More sharing options...
LosDiosDeVerde86 Posted December 21, 2005 Share Posted December 21, 2005 you're insane...............and i love you. Link to comment Share on other sites More sharing options...
Caboobaroo Posted December 21, 2005 Share Posted December 21, 2005 I'd be happy for a 3.90 front diff, a VLSD 3.90 for my rear and a Forester 5th gear. But hey, if you can do the 4.44 front and a Forester 5th gear, I'd be one happy camper in my RX;) Link to comment Share on other sites More sharing options...
Natoe Posted December 22, 2005 Share Posted December 22, 2005 yeah your not gonna find to many 4.44's in the US unless you ship em from japans WRX's... Link to comment Share on other sites More sharing options...
ballitch Posted December 23, 2005 Share Posted December 23, 2005 ya i agree, finding 4.44 gears is harder than finding a LSD in a JY!!! but what your talking about is the ultimate subaru tranny for our cars, tons of crawl ratio, and a good highway gear to save gas, not to mention the FT4WD ability. if you could make them, i bet you'd have a line a block long with peole that are dying to buy one. ~Josh~ Link to comment Share on other sites More sharing options...
NoahDL88 Posted December 23, 2005 Author Share Posted December 23, 2005 yeah your not gonna find to many 4.44's in the US unless you ship em from japans WRX's... Talked with my service writer, apparantly there not too hard to find. Link to comment Share on other sites More sharing options...
Island Roo Posted December 23, 2005 Share Posted December 23, 2005 what did they come stock in? i mean in the US? Link to comment Share on other sites More sharing options...
NoahDL88 Posted December 23, 2005 Author Share Posted December 23, 2005 what did they come stock in? i mean in the US? Still working on that, but i believe foresters are a possibility, and some others. Link to comment Share on other sites More sharing options...
Natoe Posted December 23, 2005 Share Posted December 23, 2005 well thats cool, i was under the impression they were ONLY made overseas but i guess not. Link to comment Share on other sites More sharing options...
ballitch Posted December 23, 2005 Share Posted December 23, 2005 some foresters, but mainly from legacy outbacks, cant remember what years though. they are hard to find i know that much. ~Josh~ Link to comment Share on other sites More sharing options...
Island Roo Posted December 27, 2005 Share Posted December 27, 2005 so any word on what they come stock in? i mean something definate? Link to comment Share on other sites More sharing options...
NoahDL88 Posted December 27, 2005 Author Share Posted December 27, 2005 so any word on what they come stock in? i mean something definate? Subaru Transmissions? Thats about as definate as i can get right now. Link to comment Share on other sites More sharing options...
RenaissanceMan Posted December 27, 2005 Share Posted December 27, 2005 I have torn into those RX trannies quite a bit, the only way you can change the final drive in them IMO, is to get the final drive out of the FT 4wd XT6. The regular PT 4wd transmissions have a way different output shaft. One thing I did notice, is that you CAN take the lowgear setup out of a PT and put it in the RX transmission, as the input shafts for the two are the same. I seriously think the only way to get a better than 3.9 final drive in a FT 4wd subaru transmission is to either have a reduction gear between the engine and transmission, or simply have a machine shop make you a custom gear set $$$$$. -Mike Link to comment Share on other sites More sharing options...
WJM Posted January 1, 2006 Share Posted January 1, 2006 So, as i'll soon be in the land of plenty (Seattle) I'm hopeing to find 2 transmissions, and a few random parts. I'd like to find a 5MT with 4.44 gears, along with a matching Rear Diff A N/A 5mt D/R with the 1.59 low range A LSD for the Front, i know this one is a pipe dream, but you never know. So, you ask, what pray tell is my plan? Front LSD 4.44 final drive RX center locking Diff 1.59:1 low range. now, putting this all behind a EJ22, and a locked rear end and who needs a "real" transfer case. Assuming this is feasable, and or do-able with out millions of hours of work, i'm sure i'd be happy enough to build these for the board. As of now i only know that the better low range can be swapped, so don't get your hopes up too high, and if anyone else wants to dive into this one, please by all means go to it. Cool. LSD front is as possible for the RX boxes as it is for the EJ 5mts. They are very common. Go get a Cusco, Kaaz, OBX-R, ATS, stock STi one...etc. As far as I know, the rear 4.444 swap should be simple. Pull a rear diff from an AT outback, and swap the diffs. Done. FRONT...little harder. Pinion shafts are different. I'm sure it can be done. yeah your not gonna find to many 4.44's in the US unless you ship em from japans WRX's... *BUZZZZZER* Wrong. They come in alot of items here in the USA. Pretty much any Auto Legacy with the EJ25 has 4.444. Outback, Legacy GT, Impreza 2.5 RS....Foresters...etc... Oh, 5MT! The Outback XT, Forester XT, Baja Turbo.....some others. Lots on the road. Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 1, 2006 Share Posted January 1, 2006 *starts making list* Forrester 5th gear... 3.90 tranny from XT6... aftermarket LSD... 3.90 open rear diff... my stock 3.70 LSD... Himmm I see lots of fun here! Maybe even add in a low range from a PT tranny and see what she can do..... Link to comment Share on other sites More sharing options...
mudrat79 Posted January 2, 2006 Share Posted January 2, 2006 Noah....I posted in Vanislru's post over in off-road topics but this is not an easy bolt in task..... http://www.ultimatesubaru.org/forum/showthread.php?t=48347&page=3 Also, FRONT LSD is very easy....I've done it 5 times now.... Shane's Forester is Still running just fine with his Hi-lo Lsd 3:90 trans..... I can sell someone the components to stuff one into a trans, or a Re-sealed trans with LSD in it already....If Folks look back in the For sale Forum far enough they will see them for sale..... http://www.ultimatesubaru.org/forum/showthread.php?t=32987&highlight=3%3A90+LSD+tranny LAter, John Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now