DUTHAI Posted December 28, 2005 Share Posted December 28, 2005 2002 Forester Clock- same problem as everyone else... goes on/off, now it won't work. Did they ever do a recall on this? Link to comment Share on other sites More sharing options...
otis Posted December 28, 2005 Share Posted December 28, 2005 DUTHAI said: 2002 Forester Clock- same problem as everyone else... goes on/off, now it won't work. Did they ever do a recall on this? this is a common problem... if you did a search, you would have come up with: http://www.ultimatesubaru.org/forum/showthread.php?t=14124&highlight=forester+clock Link to comment Share on other sites More sharing options...
Sweet82 Posted December 28, 2005 Share Posted December 28, 2005 Dig into it, It's probably the easiest fix your ever going to do on your Forester. Link to comment Share on other sites More sharing options...
mtbe Posted December 29, 2005 Share Posted December 29, 2005 My 99 forester clock went out too. It's a very simple fix with a soldering iron. No need to go out an buy anything. I'm assuming your's is the same. If you remove the clock (use a small screwdriver - there are two tabs that you need to undo), then unplug it. Remove the clock from the plastic front (I actually broke one of the tabs doing this so be careful). On the back of the electronics, you will see several small rectangular pieces with numbers on them. Look for the one that has 510. Part of it is partially under the display and seems difficult to reach. This is a resister and it has lost it's connection to the board. Just resolder to the board it it'll take care of it! Check out the picture here!!!!!! http://www.scoobymods.com/forums/showthread.php?t=5028 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now