monstaru Posted December 29, 2005 Share Posted December 29, 2005 and balljoints.well, i did my strut rod bushings and control arm bushings today.as usual i read for about an hour before and quite a bit in between.had to get the sleeves of the control arm bushings heated and pressed out.crazy.the guy tried it the first time and just could not believe it did not come out.thats what 230,000 miles will do to them.man my strut rod bushings werea little to soft for me.all in all it was a good day.......still have thatdamn clunk.......engine and tranny mounts(thanks jamie,hella cheaper) are here and awaiting install.maybe tomorrow if i don't work.i am gonna be super pissed if it is the coil spring moving around in the strut......... Link to comment Share on other sites More sharing options...
rallyruss Posted December 29, 2005 Share Posted December 29, 2005 the super pro bushings I installed were really simple actually. the sleves did not have to be removed just the bushings. if you drill some holed in the bushing then knock it out it goes real easy. car rides nice now and the rear camber issue is fixed too. Link to comment Share on other sites More sharing options...
NorthWet Posted December 29, 2005 Share Posted December 29, 2005 ....had to get the sleeves of the control arm bushings heated and pressed out.crazy.the guy tried it the first time and just could not believe it did not come out.... Are you talking about the front control arm bushings? What did you use to replace them? (AFAIK, there is no stock replacement for that bushing. I would LOVE to be proved incorrect.) Link to comment Share on other sites More sharing options...
TomRhere Posted December 30, 2005 Share Posted December 30, 2005 Are you talking about the front control arm bushings? What did you use to replace them? (AFAIK, there is no stock replacement for that bushing. I would LOVE to be proved incorrect.) I bought a set for my '82 BRAT a couple years ago. The on-line parts place ain't there anymore, but I have others to try. Will let you know..... Link to comment Share on other sites More sharing options...
monstaru Posted December 30, 2005 Author Share Posted December 30, 2005 i got'em on ebay............Auctionfrontierthey have an e-bay store.they had like 10 sets or something like that. and my experience was pretty good as well russ,i have had that front end apart so many times that all the bolts were easy:grin: i would have liked to get super pro's but i was not chasing my klunk at that time........,and i definitely need some give for the beast. Link to comment Share on other sites More sharing options...
NorthWet Posted December 30, 2005 Share Posted December 30, 2005 Silly me!!! I was assuming EA82... :-\ . Link to comment Share on other sites More sharing options...
monstaru Posted December 30, 2005 Author Share Posted December 30, 2005 silly you....... Link to comment Share on other sites More sharing options...
monstaru Posted January 9, 2006 Author Share Posted January 9, 2006 did some motor and tranny mounts today......man that drivers side rear bolt is a ***************......still have the clunk.i think my coil spring is rocking back and forth on the base plate of the strut.whaddya think? Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 9, 2006 Share Posted January 9, 2006 did some motor and tranny mounts today......man that drivers side rear bolt is a ***************......still have the clunk.i think my coil spring is rocking back and forth on the base plate of the strut.whaddya think? stupid RX springs... What kind of a clunk is it? Usually if its suspension related, you can feel it in the steering wheel but if its motor/tranny related, you can feel it through the floor. Also, take a passenger on a trip in it and see if they can help pinpoint which side its coming from and thenget under there and start shaking the bejeezus outta it. If anything, jack it up and go poking around with a prybar. Might also want to try the brake calipers to see if one might be slightly freezing on you. Link to comment Share on other sites More sharing options...
monstaru Posted January 9, 2006 Author Share Posted January 9, 2006 been there done that....baccaruda is along on this one......i have shaken ever ************in thing on there and am stumped.....i started replacing things to find it and i am out of things to replace.i am gonna loosen the pitch stopper tomorrow and see if it has play from either end(thanks ruda)************,************,************ Link to comment Share on other sites More sharing options...
Schatzi Posted June 11, 2008 Share Posted June 11, 2008 I love this forum, this post is over a year old but still helps me! In case anybody wants to know the control arm bushings for an EA81 are available by Beck-Arnley part no. 101-3547. I have a clunk in the front end of my hatch too, that I cant seem to pinpoint. I've done the engine mounts, tie rods (inner and outer), balljoints, wheel bearings, and am about to do the control arm bushings. It's relieving to see someone else had this malady! Link to comment Share on other sites More sharing options...
monstaru Posted June 11, 2008 Author Share Posted June 11, 2008 holy old threAd batman...............that clunk ended up being the tranny itself!the output shaft had play in it and it was making a horrible racket..cheers, brian Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now