edefauler Posted December 29, 2005 Share Posted December 29, 2005 Hello, I have before 10 days and 1000KM change the cylinder head gasket of my Brat's (EA81) And now need he much oil! Befor i have do the change the Brat needed 1 litre of /1000KM and now i must after 200KM 1 litre oil refill Who know what can be wrong ? Greetings from germany with Snow Norbert Link to comment Share on other sites More sharing options...
MilesFox Posted December 29, 2005 Share Posted December 29, 2005 does it leak oil? it is possible the oil is being used up by the PCV system remove the pcv valve and clean it up really goood, or replace it. check all the hoses for blockages Link to comment Share on other sites More sharing options...
edefauler Posted December 30, 2005 Author Share Posted December 30, 2005 Hello, no its dont leak. Thats was to simple. What is the PCV Valve ? Norbert Link to comment Share on other sites More sharing options...
edefauler Posted January 2, 2006 Author Share Posted January 2, 2006 Hello, i dont have find the PCV Valve:mad: Only what i have find is an big tube from the Valve cover on the right Engine side to the Airbox and a thick tube going from the left Valve cover on a Y-distributor and from this Y-distributor going a thick tube under the carburetor an a little tube to the Airbox. But a Valve i dont have find. Anybody any idea ? Norbert Link to comment Share on other sites More sharing options...
scrap487 Posted January 2, 2006 Share Posted January 2, 2006 ok just to make sure I got this right: 10 days ago you changed your head gasket before you changed it, the brat needed 1 litre every 1000km but now it needs 1 litre every 200km okay, the pcv valve I believe is on the right side of the intake manifold, the side with cylinders 1 and 3. a vacuum hose comes off of it, and the pcv is screwed into the intake manifold, I cant describe how it looks exactly, but it should need a fairly large (deep)socket/wrench to pull it out, I think 17mm, but not quite sure, give or take a couple mm. I'll try to find a diagram that can show you in a minute. when you take the pcv off, it should rattle around when you shake it, if it doesnt, or if it barely does, soak it in gasoline or run a bunch of carb cleaner through it or something similar. clean it out really good. Link to comment Share on other sites More sharing options...
edefauler Posted January 2, 2006 Author Share Posted January 2, 2006 @scrap487 thanks for your answer. i will locking for that when you have a diagramm that was great! Norbert Link to comment Share on other sites More sharing options...
[HTi]Johnson Posted January 2, 2006 Share Posted January 2, 2006 PCV valve is called "Positive Crankcase Ventillation" valve. There might be a sticker under the hood of the vehicle with the "Vacuum Diagram". It may show where the valve is. I forgot. Anyone have a pic or diagram for him? Ich wiess einige Deutsch. Ich vergass viel. Wie heisst dein Auto? Link to comment Share on other sites More sharing options...
edefauler Posted January 2, 2006 Author Share Posted January 2, 2006 Hello, under the hood wasn´t a sticker. It have become a new color an so anybody have clean the in side from the hood. So i need a Diagramm Norbert Hey your German is good! Link to comment Share on other sites More sharing options...
edefauler Posted January 13, 2006 Author Share Posted January 13, 2006 Hello, ich have find the ventil and we have change this pcv ventil, so the brat not need so much oil. But you dont can say its low, the engine need now 1Liter/200km....... that the half from the start but to much Have anyone any idea what i can do ? Norbert Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now