Mr Fishums Posted January 4, 2006 Share Posted January 4, 2006 I was looking into some lift kits for EA 81's Found this site with a pretty nice photo section, and some decent looking kits. What do you guys think of this one? Know of any place that has a nice setup or an alternative? http://www.ozified.com/liftkits.htm I wanna go with that 4'" front 3" rear kit. It claims I can run a 27" tire without modification, using peugot wheels? Would this be true on a Brat as well? Also anyone know of a decent cost effective steel alternative to the elusive peugot rims? Thanks, Mr Fishums Link to comment Share on other sites More sharing options...
A DOG Posted January 4, 2006 Share Posted January 4, 2006 http://www.ultimatesubaru.org/forum/showthread.php?t=24980 You'll find everything you need here. Link to comment Share on other sites More sharing options...
MSSLGECKO Posted January 4, 2006 Share Posted January 4, 2006 There are a few lift vendors around the site. They should be pretty easy to find. Allied Armament, BYB/PK (you found the website), some people can lift your car themselves. My rig has the 4/3 lift that you reffered to and I have 27" tires on 14" peugeot wheels. I had to trim the front fender some to prevent rubbing. If you follow the link in my signature, you can see how I trimmed and how everything fits. Good luck - it's well worth it! Link to comment Share on other sites More sharing options...
Mr Fishums Posted January 4, 2006 Author Share Posted January 4, 2006 :cool: damn that's some nice stuff, I am going to have stare at this and drule for a while. That allied armament site is definately looking nice. Also with that 4/3 lift that you reffered to with 27" tires on 14" peugeot wheels. Where would be a good place to locate the peugot's? I am going to try the local junkyard after work, but I doubt a french ride would have lasted that long there. I know when I was 12 I redrilled some MGA rims to squeeze on my 86 GL hatch back. They weren't what you would call road worthy, but for a car with no roof, doors, or windows they where just fine. At that age I had even welded in door rails with chicken wire, so my black lab bingo could ride with me :-p Thanks for the help, Mr Fishums Link to comment Share on other sites More sharing options...
soobmater Posted January 5, 2006 Share Posted January 5, 2006 Well, you can try the junk yard for some pugs and might luck out, i know i did. but also post a wanted thread in the market place here on the board. you might find some closer than you would of though. If you see alloys at a junk yard, make sure you grab the lugz. If you dont, you will regret it. i have a 4 inch lift front and rear, and i run some 28's. I had to do a little bit of trimming up front, and a tad in the back. well anyway good luck! Link to comment Share on other sites More sharing options...
Mr Fishums Posted January 5, 2006 Author Share Posted January 5, 2006 I just got done reading the thing about the toyota 6 bolt rims, that is such a great idea! So nice! My work has a full machine shop so I should be able to make the other 4 holes as nice as the 4 stock ones. Brilliant! I never thought of that, thanks to whoever thought of that! Mr FIshums Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now