Meeky Moose Posted January 8, 2006 Share Posted January 8, 2006 well i was thinkin about doing something that noone has ever done to thier soob before.. it'll be the first.. my new brat has had some body work done to it already so its got primer patches all over the place.. there is very little rust that needs to be fixed.. now what i was thinking was since its gonna need a piant job, all the trim put back on after the rest of the body work and theres a local line-x place here (rhinoliner). i was thinking why not just have them line-x the hole brat? in black of course.. then i can trim and put the chrome and everything else back on it.. i see some major benefits in doing this too.. 1. it will never rust again, 2. it cannot be scratched, 3 i will never have to wax it, 4 i can go through the woods to grandmas house and not mess up my new paint job.. prolly many more reasons too, lol.. what do ya'll think? Link to comment Share on other sites More sharing options...
75subie Posted January 8, 2006 Share Posted January 8, 2006 that is a cool idea, and it would be a first alright:lol: Link to comment Share on other sites More sharing options...
suberdave Posted January 8, 2006 Share Posted January 8, 2006 thats what im doing to my wagon in the spring Link to comment Share on other sites More sharing options...
nicky nighteyes Posted January 8, 2006 Share Posted January 8, 2006 Do it!!!!! the only negative i can think of is that dirt and mud are harder to remove on the rhino liner. solution: don't remove it. Link to comment Share on other sites More sharing options...
jeffast Posted January 8, 2006 Share Posted January 8, 2006 do it that would be freakin awsome and indistructable and definatly a first do it Link to comment Share on other sites More sharing options...
subeman90 Posted January 8, 2006 Share Posted January 8, 2006 I can think of one reason not to do it..... Cost! If you want to preserve it why don't you do the bottem of it too? Just make sure you open up the drain holes in the doors etc so you don't get water being retained in places you don't want water. Link to comment Share on other sites More sharing options...
WoodsWagon Posted January 8, 2006 Share Posted January 8, 2006 Only drawback I see, other than cost, it that it will cut your gas milage. Instead of the nice smooth paint, it will be like hauling an ugly rock through the air. Link to comment Share on other sites More sharing options...
wintersubaru Posted January 8, 2006 Share Posted January 8, 2006 Make sure you prep it right. My boss spent 2500$ on his plumbing truck and you can tell the spots they didnt prep right in the tool compartments because it didnt hold up but for a month. Link to comment Share on other sites More sharing options...
beetreesubie Posted January 8, 2006 Share Posted January 8, 2006 do it bud get down too ur rednecks roots it feels good {cant do it rite} redneck engineeer it . :drunk: reely bad whooooooooo Link to comment Share on other sites More sharing options...
Phizinza Posted January 8, 2006 Share Posted January 8, 2006 Only drawback I see, other than cost, it that it will cut your gas milage. Instead of the nice smooth paint, it will be like hauling an ugly rock through the air. Only it wouldn't be ugly The other thing is, if you want to stop the rust all together, you are going to need it down to every panel inside and out! The whole underneth of the car too. For me, if I were to do it, it would take a week of lots of work cleaning... But, if your up for it. It sounds great. Link to comment Share on other sites More sharing options...
Seahag1978 Posted January 8, 2006 Share Posted January 8, 2006 Sorry, but I can't imagine prepping a whole car for that process. One tiny pinhole and water gets in... then that stuff comes off in sheets. Trust me. Didn't do the whole car... just the bed. One speck of wax, shiny paint. Sometimes even a really hot day in strong sun. Done. Not to mention keeping it looking even slightly acceptable. Don't do it... I would rattle can it before that. Link to comment Share on other sites More sharing options...
75subie Posted January 8, 2006 Share Posted January 8, 2006 also, if you are going to do this, i hope you plan on keeping it for like ever, because it probly won`t be worth much looking like a big ol rock:lol: Link to comment Share on other sites More sharing options...
scrap487 Posted January 8, 2006 Share Posted January 8, 2006 its a waste, not only you lose some at high speeds, it will get VERY heavy if you do it like that. its a first for a brat but I've seen people do it to other cars. my advice would be to rather than do that, take off all the body panels, get that latex mold making stuff and make some molds and then get yourself some plastic or fiberglass or carbon fibre or whatever you want to use, it will be lighter, more dent resistant, stronger, more easily reparable than if you rhinolined the whole car. is it also kind of counterintuitive to want a car to look nice that you take out in the bush all the time? it is definately worth rhinolning the underbody and the floorboard tho Link to comment Share on other sites More sharing options...
subeman90 Posted January 8, 2006 Share Posted January 8, 2006 what about spray undercoating????? it is waaaaayyyyy cheaper and actually might last longer? and it is easy to touch up too. Link to comment Share on other sites More sharing options...
Seahag1978 Posted January 8, 2006 Share Posted January 8, 2006 what about spray undercoating????? it is waaaaayyyyy cheaper and actually might last longer? and it is easy to touch up too. That's what I do... keep sanding it back and respraying the bed where it failed. A bit of a PITA but it always looks good Link to comment Share on other sites More sharing options...
Meeky Moose Posted January 8, 2006 Author Share Posted January 8, 2006 well the brat is pretty much prepped as it is, no trim, chrome, nothing.. half the body has been sanded and primed already.. if i keep the brat, this spring / summer when its on the lift its getting a ton of undercoating under it as well.. its that or i get the rollon stuff from work, have it painted ($300 special from a friend) then rollon a bedliner and put it back together.. i'm basically lookin at the project as a low to no cost situation as well as far as the paint / liner goes hehe.. thanks for the input all Link to comment Share on other sites More sharing options...
Ryanb Posted January 9, 2006 Share Posted January 9, 2006 I've been thinking about doing this to my wagon for over a year. I don't know I don't know i don't know. I will do at least the bottom half, but I REALLY want to see pics if/when you get this done. I'm all for it. DO IT! Haha. Link to comment Share on other sites More sharing options...
subyrally Posted January 9, 2006 Share Posted January 9, 2006 it can be done rather nicely, they have the ability to lay the stuff on thin and smooth or thick and bumpy. the texture of the liner depends of the method of spraying. Link to comment Share on other sites More sharing options...
volkswitt Posted January 9, 2006 Share Posted January 9, 2006 i have wanted to do that to the inside of my house! Link to comment Share on other sites More sharing options...
Sweet82 Posted January 9, 2006 Share Posted January 9, 2006 I Rhino'ed Summer and love it! I'd avoid the spray on undercoating, besides being heavy, they seem to take years to dry and if you brush up against it your going to get tar on your clothes even after it's dry. Spray on bedliners don't weigh as much and actually dry. Many-a rock crawler are Rhino'ed, for the same reasons your talking about. Good Luck, Glenn, 82 SubaruHummer--Summer 84 GL--Mad Max 01 Forester Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now