Lawsonmh15 Posted January 8, 2006 Share Posted January 8, 2006 Been looking at replacing my struts. Been planning on getting the KYB GR2's but am wondering what #'s for my Legacy SUS. I think it's the Legacy Outback, but am not sure. If so, do I just use the SM5361's all around? Here's a link to the info I'm going by. Please let me know. TIA. Link to comment Share on other sites More sharing options...
Lawsonmh15 Posted January 8, 2006 Author Share Posted January 8, 2006 Wondering if these will work. http://cgi.ebay.com/ebaymotors/KYB-GR-2-GR2-STRUTS-SHOCKS-SUBARU-LEGACY-4WD-95-99_W0QQcmdZViewItemQQcategoryZ33590QQitemZ8026654173 Link to comment Share on other sites More sharing options...
Handtool Posted January 8, 2006 Share Posted January 8, 2006 Wondering if these will work. http://cgi.ebay.com/ebaymotors/KYB-GR-2-GR2-STRUTS-SHOCKS-SUBARU-LEGACY-4WD-95-99_W0QQcmdZViewItemQQcategoryZ33590QQitemZ8026654173 These struts are for a normal legacy and are a bit shorter than the outback models. The can be made to work but you will loose some ground clearance. Great price tho... Check out tirerack.com for the best price on the proper replacements for your SUS. Link to comment Share on other sites More sharing options...
Lawsonmh15 Posted January 8, 2006 Author Share Posted January 8, 2006 These struts are for a normal legacy and are a bit shorter than the outback models. The can be made to work but you will loose some ground clearance. Great price tho... Check out tirerack.com for the best price on the proper replacements for your SUS. Anybody know how much clearance I will lose? What are the advantages of going to a shorter strut? Less Lean when cornering? Are there any disadvantages other than less clearance? Will these bolt right on without having to fab. a workable solution? TIA. Link to comment Share on other sites More sharing options...
Handtool Posted January 10, 2006 Share Posted January 10, 2006 Most people go the other way. Add outback struts to their non-outback legacy. Using the non-outback springs, I've read reports of a 1.5 to 2 inch gain in clearance. More if they switch to outback springs as well. I suspect that you would loose about that much clearance. The difference in going to legacy struts on your sus is that you will be using longer springs on shorter struts assuming your reusing the outback springs. I would imagine that this would affect the useable stroke of your struts. They will bolt up with no problems. Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted January 10, 2006 Share Posted January 10, 2006 Just a weird idea. check at www.boxer4racing.com Teague was putting Konis in junkyard struts and doing an exchange. I dunno if it's too expensive for you or maybe not doable for the Legacy. Probably overkill. There was a website somewhere (scoobymods or ravensblade/northursalia )that had pics and tutorial on putting the Konis in your self. fyi Carl Link to comment Share on other sites More sharing options...
theflystyle Posted January 10, 2006 Share Posted January 10, 2006 make sure you have a 4wd model for that particular set of struts. i think there is a difference between the rear ones from fwd to the awd models.. can someone correct me if im wrong?? Link to comment Share on other sites More sharing options...
tunered Posted January 11, 2006 Share Posted January 11, 2006 putting the longer springs on the shorter struts,wouldnt this make the ride a little harsher? just thinkin. Link to comment Share on other sites More sharing options...
HooptyGL Posted January 11, 2006 Share Posted January 11, 2006 Been looking at replacing my struts. Been planning on getting the KYB GR2's but am wondering what #'s for my Legacy SUS. I think it's the Legacy Outback, but am not sure. If so, do I just use the SM5361's all around? Here's a link to the info I'm going by. Please let me know. TIA. pretty sure lego springs on a '95 ob strut adds 2 " to ride height on any legacy through 99...you need the frame spacers though and a few other parts from the donor OB's suspension. i heard from a little birdy that you can re-bore the holes on the strut towers and Forester stuts will slide right on in. that would actually give your OB a bit more clearance....just my $.02 - neal Link to comment Share on other sites More sharing options...
Handtool Posted February 16, 2006 Share Posted February 16, 2006 ...you need the frame spacers though and a few other parts from the donor OB's suspension. Are the frame spacers for the angle of the axels? Anybody got pics of these spacers? Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted February 16, 2006 Share Posted February 16, 2006 Some individuals as well as http://www.boxer4racing.com are putting Konis inside their old Impreza struts. There are on line instructions for that too. But I dunno what the application would be for a legacy. Probably doable. Carl Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now