Jump to content
Ultimate Subaru Message Board

Replaced timing belt, now belt noise at start up.


Recommended Posts

94 legacy. I installed a new timing belt and water pump the other day. Since then, I've noticed what I'll describe as a belt noise. It sounds like the belt is chattering a little. It is not coming from the drive belts. But this only lasts about 1 minute during the first start of the day. By the time I get to my first stop light away from home the noise is gone and the engine purrs like a kitten. I also have a bit stronger accelleration with the new belt. Engine seems to be running good when the noise is there: smooth rpms, not rough or clunky.

 

Since the car runs great after that first minute, I am not *too* worried about this noise.

 

Any ideas?

 

Keith

Link to comment
Share on other sites

I guess I could try tightening the drive belts, the sound just doesn't seem like its coming from them. Worth a try though. I didn't notice the noise when I started the car after the new timing belt was on, but before everthing else was put back. Any other ideas?

 

Keith

Link to comment
Share on other sites

after i replaced my timing belt recently, i had a bit of a squeaking noise coming from the engine that i was pretty sure was timing belt-related. upong opening the hood, i noticed that the power steering pump pulley was deflecting like crazy. turns out i put the sucker on backwards:banghead:. i think i was just assuming i had made a mistake with the timing belt because of my nervousness about the task, which i had never done before. i would recommend looking over everything you've done, even the minor things that are not as difficult, like accessory belts. besides, they're the easiest place to start anyway.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...