NoahDL88 Posted January 12, 2006 Share Posted January 12, 2006 I've had the EJ running in the car for about 2 months now, and i decided to "clean up" the wiring, and now it dosn't run argh. Just needed to vent, its not the daily driver, i can borrow my dad's forester for the next few weeks, but this thing is getting me on my last nerve. It cranks just fine, and its getting fuel, so i'm assuming i have an issue with the spark, but i can't seem to figure out why i don't have it. Link to comment Share on other sites More sharing options...
ballitch Posted January 13, 2006 Share Posted January 13, 2006 sorry man i cant be of too much help but......check your fuses. make sure your cam and crank sensors are screwed in all the way. and see if your grounds came loose. without seeing more or knowing more i cant help you, but you know you should have "cleaned" up the wires one by one. ~Josh~ Link to comment Share on other sites More sharing options...
Matty B Posted January 13, 2006 Share Posted January 13, 2006 Check your Earths or Ground wires, bad connections there will halt everything. Be kind to the earth! Those buggers have some load going through them sometimes. Link to comment Share on other sites More sharing options...
NoahDL88 Posted January 13, 2006 Author Share Posted January 13, 2006 sorry man i cant be of too much help but......check your fuses. make sure your cam and crank sensors are screwed in all the way. and see if your grounds came loose. without seeing more or knowing more i cant help you, but you know you should have "cleaned" up the wires one by one. ~Josh~ I cut and soldered one by one, so i'm pretty sure that they are all still good, and i'm 99% sure that my grounds and power feeds are good, which leaves me with the magic voodoo queen, and i am at her mercy. Link to comment Share on other sites More sharing options...
NoahDL88 Posted January 19, 2006 Author Share Posted January 19, 2006 Huzzah, its running again, it appears to be at the mercy of the voodoo queen, as i have no idea what i did to get it running again. Link to comment Share on other sites More sharing options...
tattooboy Posted January 27, 2006 Share Posted January 27, 2006 You had to have pulled something apart by mistake....sucks! If its turning over, and your cluster seems to be fine, it has to be either fuel or ignition. If it was running before, its definatly something trivial. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now