monstaru Posted January 17, 2006 Share Posted January 17, 2006 when you put your 5 spd d/r in ,did you experience what felt like bind in the front end?it only happens when i am going around corners. did i maybe happen upon a fulltime?my axles fit....? whattup??? Link to comment Share on other sites More sharing options...
suberdave Posted January 18, 2006 Share Posted January 18, 2006 this happened to me when i first put a D/R in my auto car. i thought i had the wrong gear ratio diff. so i got a different rear diff. it was then worse. i just drve the crap out of it. (trans was under warrenty) and it was all good. trans had been sitting for years. maybe something just needed to be loosened up. this was 4 years ago, havent had any prob since. -=Suberdave=- http://www.suberdave.com Link to comment Share on other sites More sharing options...
monstaru Posted January 18, 2006 Author Share Posted January 18, 2006 it just may be the different feel.but man it feels like it is binding.weird.i'll let it go for a day or so and see how it feels. Link to comment Share on other sites More sharing options...
baccaruda Posted January 18, 2006 Share Posted January 18, 2006 let me drive it and watch the tires as you drive it. it might just be the size of the tires. Might get better when you put in the LSD (more push from the back? or would that be only with a FT4wd?)... Link to comment Share on other sites More sharing options...
monstaru Posted January 18, 2006 Author Share Posted January 18, 2006 that would be ft4wd........it might be a ft4wd.it.s from a 90's loyale.and i don't think it was original Link to comment Share on other sites More sharing options...
baccaruda Posted January 18, 2006 Share Posted January 18, 2006 I don't suppose you can read any part numbers or serial numbers off of it? Link to comment Share on other sites More sharing options...
Hodaka Rider Posted January 18, 2006 Share Posted January 18, 2006 Hmmm.. Can you not tell FT4WD from P/T 4WD by the linkage? That and the FT did not have much reduction in Low. Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 19, 2006 Share Posted January 19, 2006 with the FT, you'll notice the 4wd linkage has 3 positions where the part time has 4. Full Time d/r 4hi neutral 4low Part time 2hi 4hi neutral 4low You'll notice a major difference... Link to comment Share on other sites More sharing options...
monstaru Posted January 19, 2006 Author Share Posted January 19, 2006 i guess that my linkage tweaked when i mounted it......it has been moved now.and the 4wd lever goes all the way down .i have to say that i have been under some stress and i guess i was trying to rush it.it is my daily driver ya'know. i am the king........ on a positive note....i can do 65 in 4 hi. Link to comment Share on other sites More sharing options...
baccaruda Posted January 19, 2006 Share Posted January 19, 2006 so that *did* fix the bind? Link to comment Share on other sites More sharing options...
monstaru Posted January 19, 2006 Author Share Posted January 19, 2006 will find that out this morning. Link to comment Share on other sites More sharing options...
monstaru Posted January 19, 2006 Author Share Posted January 19, 2006 nope ,no bind.it still is really grabby.i went to the rgavel pit after work and it seems that i need a witness to check me out from the exterior of the vehicle .i'll get ruda to check it out this weekend. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now