Weber Adaptor Plate

[bigjim5551212]

1)There are several adaptor plates for the EA82 that can be used. Has anyone used the "datsun" thin adaptor, redline 99004.300 ?

 

2)Is there water coming to the carburetor from the Manifold? Will this have to be blocked

[pyromanic]

Bump

 

 

1)There are several adaptor plates for the EA82 that can be used. Has anyone used the "datsun" thin adaptor, redline 99004.300 ?

 

2)Is there water coming to the carburetor from the Manifold? Will this have to be blocked

 

 

1) Don't know, sorry.

 

2) Yes.

[hatchsub]

1). Dont know either.

2). yes there is a coolant line that runs to the base of the carb. It come up through the manifold from a rubber hose. You'll see it if you look at the manifold. If the Weber doesnt need this line then just block off the coolant line.

[CHIM]

The water line was nessasary for me when winter hit, my weber liked to freeze up till i hooked that water line back up, kept it warm as to not freeze.

 

 

http://www.ultimatesubaru.org/forum/showthread.php?t=51272

 

~Dayten~

[CHIM]

1)There are several adaptor plates for the EA82 that can be used. Has anyone used the "datsun" thin adaptor, redline 99004.300 ?

 

2)Is there water coming to the carburetor from the Manifold? Will this have to be blocked

 

is that adapter made for the 32/36 dgev carb?

Is they where the same as the subaru's they should have been the same part number, I would recomend using the block made for subaru, there has to be a difference or they woulnd't have made them aplication specific and would be same part numbers.

 

EA-82# 99004-731

EA-81/71# 99004-110

 

~Dayten~