Scott in Bellingham Posted January 25, 2006 Share Posted January 25, 2006 well we got a few projects going , Wedesday night at Scotts place is looking good Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted January 25, 2006 Author Share Posted January 25, 2006 Jan 25 2006 This week Andy starts his lift for the Hatch, also got the Turbo car to work on should be a good night , also need to plan the activity for the 11th of Feb, so everyone come Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted January 26, 2006 Author Share Posted January 26, 2006 had a good evening, Andy got his blocks cut and cleaned up for the Hatch lift, got the front of the turbo car all trimmed up "Sawzall Sawzall Sawzall", Turbo cars lookin good thanks for the help, do it again next week . SJR Link to comment Share on other sites More sharing options...
dustyrider Posted January 30, 2006 Share Posted January 30, 2006 so this is a weekly thing? I dont use the internet enough! aaa. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted January 30, 2006 Author Share Posted January 30, 2006 so this is a weekly thing? I dont use the internet enough! aaa. come on out 7:00 Wed, bring a project (or snacks) we may cast alluminum this wed Link to comment Share on other sites More sharing options...
uncoolperson Posted January 30, 2006 Share Posted January 30, 2006 Yay! Casting sounds like fun... if my brother can make it i'll have him drive the brat out, yup she's roadin it up again... even more once i go get the alignment taken care of... Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted January 30, 2006 Author Share Posted January 30, 2006 Yay! Casting sounds like fun... ... it will be your parts, you can add some custom lettering, maybe "Andys Hatch" or whatever Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted January 31, 2006 Author Share Posted January 31, 2006 Clayton bring your Hatch with the steel 15 pug wheel I want to check clearance on these wheel for the turbo thanks Link to comment Share on other sites More sharing options...
dustyrider Posted January 31, 2006 Share Posted January 31, 2006 come on out 7:00 Wed, bring a project (or snacks)we may cast alluminum this wed OK Ill bring my marshmellows! Link to comment Share on other sites More sharing options...
uncoolperson Posted February 2, 2006 Share Posted February 2, 2006 last nights progress on the lift, Thanks Scott! Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted February 2, 2006 Author Share Posted February 2, 2006 last nights progress on the lift, Thanks Scott! thats the UnCoolest thing Ive ever saw Link to comment Share on other sites More sharing options...
ezapar Posted February 2, 2006 Share Posted February 2, 2006 Totally UNCOOL I dig the fact that it's finally in motion Scott. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted February 7, 2006 Author Share Posted February 7, 2006 everyones welcome tomarrow night , myself i might be tied up working on a building permit aplication and some CAD drawings,dont let that stop ya , I do want to check out my RC truck to make sure its ready for Sat Link to comment Share on other sites More sharing options...
uncoolperson Posted February 7, 2006 Share Posted February 7, 2006 CAD drawings... i could help out with that one scott, it is what i do 40+ hrs a week everyones welcome tomarrow night , myself i might be tied up working on a building permit aplication and some CAD drawings,dont let that stop ya , I do want to check out my RC truck to make sure its ready for Sat Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted February 13, 2006 Author Share Posted February 13, 2006 this week 15 Feb Wed at 7:00 we should have a Justy to look at , goin to lift it a bit Link to comment Share on other sites More sharing options...
djkindt Posted February 16, 2006 Share Posted February 16, 2006 this week 15 Feb Wed at 7:00 we should have a Justy to look at , goin to lift it a bit Yep! I'm new here, and proud to say that my justy is the "guinea pig" for Scott's lift ideas. I was thinking 1 or 2" originally, but Scott convinced me that if we are going through the trouble of doing it might as well do 3 inches. Can't wait! Thanks guys. Eventually (this spring) I hope to build a turbo justy setup for it too. Link to comment Share on other sites More sharing options...
dustyrider Posted February 22, 2006 Share Posted February 22, 2006 What's the plan for this week Scott? Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted February 22, 2006 Author Share Posted February 22, 2006 What's the plan for this week Scott? Andy has some front wheel bearing issues , myself I am planning on casting the patterns for the EA81 4" strut tower Link to comment Share on other sites More sharing options...
uncoolperson Posted February 22, 2006 Share Posted February 22, 2006 Andy has some front wheel bearing issues , myself I am planning on casting the patterns for the EA81 4" strut tower wheel bearing issues solved, jeremy took it to his shop and fixed her up for me... had to drive the taurus for the day... Link to comment Share on other sites More sharing options...
dustyrider Posted February 22, 2006 Share Posted February 22, 2006 Andy has some front wheel bearing issues , myself I am planning on casting the patterns for the EA81 4" strut tower Ahhh cool what time you going to start? Ill keep you company with my blue dog. Link to comment Share on other sites More sharing options...
djkindt Posted February 22, 2006 Share Posted February 22, 2006 Would you mind if I tag along? I'd like to learn a bit about the casting process. Probably around 7pm, right? Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted February 22, 2006 Author Share Posted February 22, 2006 come on up bring SUBARU Stickers Would you mind if I tag along? I'd like to learn a bit about the casting process. Probably around 7pm, right? Link to comment Share on other sites More sharing options...
djkindt Posted February 22, 2006 Share Posted February 22, 2006 come on up bring SUBARU Stickers Don't have any yet! I'm working on it though Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted February 23, 2006 Author Share Posted February 23, 2006 had the biggest turnout yet lastnight , got the patterns cast up for the EA81 strut tower , thanks All for the Help Link to comment Share on other sites More sharing options...
Rollie715 Posted February 23, 2006 Share Posted February 23, 2006 Sounds like it's time to clean out the "lounge" area, put in a few couches, a TV and a refrigerator. And make room to pull more vehicles inside, put up a few more lights, stockpile some firewood, clear out the parking area. hmmmm Rollie Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now