markjs Posted January 29, 2006 Share Posted January 29, 2006 Can a 4WD EA81 Tranny fit in place of the FWD tranny, and which clutch and flywheel needs to be used? Can that tranny fit and run with no rear driveshaft attatched? Link to comment Share on other sites More sharing options...
Numbchux Posted January 29, 2006 Share Posted January 29, 2006 yes, except, the driveshaft helps to hold in the tranny fluid. sitting level, the fluid will not leak out with the driveshaft removed....but if it's tipped even slightly back, it will, so I'm sure it would if you were driving. Link to comment Share on other sites More sharing options...
markjs Posted January 29, 2006 Author Share Posted January 29, 2006 So what you mean is not "yes except...." but rather "no, because...." Link to comment Share on other sites More sharing options...
Numbchux Posted January 30, 2006 Share Posted January 30, 2006 So what you mean is not "yes except...." but rather "no, because...." no, you could just mount the front half of the driveshaft......I'm sure there are ways around it.... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now