bgambino Posted October 13, 2003 Share Posted October 13, 2003 I have a 95 legacy....I want to replace the timing belts...any info on this website that I can print to do the job? I am well versed on doing the Loyale type (even made my own adjusting tool to attach to my torque wrench) but not the legacy What else (besides the camshaft seals) should be replaced?w waterpump? Link to comment Share on other sites More sharing options...
theotherskip Posted October 13, 2003 Share Posted October 13, 2003 the repair info associated with this board is at: http://www.usmb.net/repair/ other resources include: http://www.endwrench.com/pages/home.html and http://techinfo.subaru.com as for what to do, it somewhat depends on mileage. usually water pump is advised, because it is cheap. tensioners can usually wait until the 2nd belt change, seals are usually recommended (the crank seal as well). Link to comment Share on other sites More sharing options...
frag Posted October 13, 2003 Share Posted October 13, 2003 To give you more than enough, you can also go to http://motor.com Click on «Motor Magazine» and look for the Foreign Service section in the july and august 2001 issues. Link to comment Share on other sites More sharing options...
brus brother Posted October 14, 2003 Share Posted October 14, 2003 http://www.endwrench.com/pdf/engine/FtCamBeltReplaceW01.pdf The above site is for the 2.2 SOC. I'm not sure what you have but they reference another article about the 2.5. Hope this helps your search pilgrim. Link to comment Share on other sites More sharing options...
Qman Posted October 14, 2003 Share Posted October 14, 2003 This is also an excellent site for the Legacy owner. Legacy Central Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now