ausubaru92 Posted February 9, 2006 Share Posted February 9, 2006 I have a 88 Vortex turbo motor and ecu that i want to put into my wagon I have a 89 Touring wagon with mpfi that i figure i will use its loom and add the required sensors and wires to use the Vortex ecu. Now the important stuff,... 1. Are the pinouts the same between year models, (eg 87 - 90) 2. Are the pinouts similar (except the obvious sensors for turbo) between turbo models and NA ones? 3. Are the pinouts similar between XT and L series models? and finally 4. Are there differences between the pinouts between US ECU's and Australian ECU's? If anybody has or could point me in the right direction as to where to find Ecu pinouts i would greatly appreciate it:D And General knowlege and advice is also great:cool: Cheers Gannon. Quote Link to comment Share on other sites More sharing options...
ausubaru92 Posted February 10, 2006 Author Share Posted February 10, 2006 Bump Please;) Quote Link to comment Share on other sites More sharing options...
calebz Posted February 10, 2006 Share Posted February 10, 2006 I beleive archemitis has dealt with this issue first hand, But IIRC, the MPFI ECU and the Turbo ECU were the same or very similar for the 87+ cars Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.