ej20t_dl_wagon Posted February 16, 2006 Share Posted February 16, 2006 hey i own a 92 L wagon i was wondering if ne 1 could tell me evry thing involved in transplanting a ej20T into my car ne help would b much appreciated thanks caleb Link to comment Share on other sites More sharing options...
calebz Posted February 16, 2006 Share Posted February 16, 2006 Thats a big question with no real direction. Search through the forums (this one specifically), gather some info on your own, then post up if you have any specific questions. Caleb Link to comment Share on other sites More sharing options...
suberdave Posted February 16, 2006 Share Posted February 16, 2006 here is some info on how i did mine. some of the problems i had. and just so no one else has to say it "there is no such thing as a EJ20t" it would be an EJ20G or EJ20K. http://www.ultimatesubaru.org/forum/showthread.php?t=50903 if you have any questions shoot me a PM. -=Suberdave=- Link to comment Share on other sites More sharing options...
Dr. RX Posted February 16, 2006 Share Posted February 16, 2006 If it were a turbo Legacy with an EJ22T it would be easy, but a N/A EJ22 would be a little harder. In general, you would need a Legacy turbo crossmember, pedal assy (the EJ20G tranny has a hydraulic clutch) and exhaust system. If you could get the front wiring harness and the ECU out of Legacy turbo that would help, in fact it should be considered critical. You'll need the radiator also. There are a lot more detail to discuss, but this will give you a general idea. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now