Mike Moore Posted February 17, 2006 Share Posted February 17, 2006 What is the hp of a stock EA82 carbed Link to comment Share on other sites More sharing options...
somick Posted February 17, 2006 Share Posted February 17, 2006 I believe 90 Link to comment Share on other sites More sharing options...
mikeshoup Posted February 17, 2006 Share Posted February 17, 2006 Isn't it 84HP? I think SPFI was 90. Chances are if its old, you're not actually pushing that. Link to comment Share on other sites More sharing options...
WagonsOnly Posted February 17, 2006 Share Posted February 17, 2006 Going by our very own Specs page: -carbed 2bbl Hitachi, on an '85 DL sedan will do 82hp@4800rpm, 101ft-lbs of torque@2800rpm -MPFI on an '85 GL-10, 94hp@5200rpm, same torque as the carbed car -MPFI Turbo, c. 1985, will do 111hp@4800rpm and 134 ft-lbs of torque@2800. -MPFI Turbo 1987 & later is good for 115 hp, same torque as earlier. -SPFI engines generate 90hp and, once again, 101 ft-lbs of torque at 4800 and 2800 rpms respectively. Link to comment Share on other sites More sharing options...
zyewdall Posted February 17, 2006 Share Posted February 17, 2006 Remember to derate the horsepower for your altitude. Driving my EA81 around at 11,000 feet elevation, I figured it was down to about 50HP (assuming it could still produce the stock 72 HP at sea level, with 220k miles.... Link to comment Share on other sites More sharing options...
idosubaru Posted February 17, 2006 Share Posted February 17, 2006 I figured it was down to about 50HP ha ha, good one! an honest guy...you should go post this at nabisco. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now