wrongturninwv Posted February 20, 2006 Share Posted February 20, 2006 Wanted to know what other wheels from other brands of cars out there fit the 95 Impreza and has the same bolt pattern. thanks Link to comment Share on other sites More sharing options...
OB99W Posted February 21, 2006 Share Posted February 21, 2006 I don't know which wheels interchange, but I do know that besides the obvious width/diameter/bolt-pattern, offset and some other things need to be considered. See: http://www.tirerack.com/wheels/tech/techpage.jsp?techid=95 Link to comment Share on other sites More sharing options...
dmanaenk Posted February 21, 2006 Share Posted February 21, 2006 Here, this will narrow your search. http://www.sromagazine.com/wheelguide.html Just remember to check offset. P.S. link is old, so doublecheck. Link to comment Share on other sites More sharing options...
ballitch Posted February 21, 2006 Share Posted February 21, 2006 theres a sticky thread on nasioc that tells you how much offset goes with what width rim.......like take the WRX rims for example...its a 6.5'' rim and the offset is like 55....take a 7.0'' rim and your offset needs to be like 48-50 or something like that....get where im coming from. sure the rims and tires will "fit", but are they the right offset for our suspensions. if you go outside of these parameters you could seriously comprimise your car's handling in corners and how it drives. ~Josh~ Link to comment Share on other sites More sharing options...
jamal Posted February 21, 2006 Share Posted February 21, 2006 also they will either not fit because of the strut or rub on the fender if you go too far from what is recommended. I always see people asking "hey will these wheels fit?" and when they're told no, they put them on anyway. A week later they're complaining about how they rub. Link to comment Share on other sites More sharing options...
cookie Posted February 21, 2006 Share Posted February 21, 2006 It's interesting that my neighbor down the street managed to get huge wheels under his vehicle. When I went by today his right front looked like a balljoint had failed. Try to stay sane for the sake of your wheel bearings and suspension. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now