idosubaru Posted February 22, 2006 Share Posted February 22, 2006 Picked up a non-turbo JDM EA82 today for my XT Turbo. yes i'm doing the opposite of what everyone else does, converting my 1987.5 XT Turbo FT4WD to non turbo. don't get confused, this is all backwards. will i need a non-turbo crossmember or will the EA82 fit in the EA82T crossmember? i know i'll need: non turbo exhaust non turbo fuel injectors. am i missing anything? Link to comment Share on other sites More sharing options...
subeman90 Posted February 22, 2006 Share Posted February 22, 2006 am I missing anything......uhh yeah a turbo.... Sorry...I had to do it. Good luck with the new other motor. Link to comment Share on other sites More sharing options...
idosubaru Posted February 22, 2006 Author Share Posted February 22, 2006 i know, disappointing as it may sound i'm castrating this bugger of it's turbo. i tried, put together the block this weekend and it irritated me. if i'm going to mess with a turbo it's going on my XT6. so NA motor it is. promise you won't come and take it back!!!!!! promise!!! it is getting an XT6 power steering, 5 lug suspension, impreza wheels, and keeping the air suspension. Link to comment Share on other sites More sharing options...
subeman90 Posted February 22, 2006 Share Posted February 22, 2006 nah...I won't come take it back but we do miss it around here...I'm sure the boro doesn't miss it though (stupid laws). Link to comment Share on other sites More sharing options...
idosubaru Posted February 23, 2006 Author Share Posted February 23, 2006 subaru_styles says there's a minor wiring difference, anyone else know what that might be? another member says the NA exhaust should clear the turbo cross member no problem. Link to comment Share on other sites More sharing options...
subyrally Posted February 23, 2006 Share Posted February 23, 2006 everything will just drop in, a few have done this already and i dont think they had to modify anything to make it work. but i might be wrong, i like turbos too much, so i wont be doing this on my car. Link to comment Share on other sites More sharing options...
soobscript Posted February 23, 2006 Share Posted February 23, 2006 I wanted that motor... Link to comment Share on other sites More sharing options...
Subaru Jim Maple Ridge Posted February 23, 2006 Share Posted February 23, 2006 The one difference you might find, presuming that the mill you are putting in is a MPFI NA, is that the distributor has only two 2 wires instead of four, don't ask me how the ECM senses crank angle; I'd like to know that myself. Newer SPFI mills all have four wires, so do all turbos, I don't know. Link to comment Share on other sites More sharing options...
ausubaru92 Posted February 23, 2006 Share Posted February 23, 2006 Is far as i know, there is no difference between the wiring between MPFI and turbo wires, except those sensors dedicated to turbo stuff. but it all should work on a na motor, Provided it is of same era,... 85 & 86 are different to 87 > 94 Hope it all works out Link to comment Share on other sites More sharing options...
TROGDOR! Posted February 23, 2006 Share Posted February 23, 2006 Is it MPFI or SPFI? MPFI is plug and play, no modifying required. Just the engine and attached parts plus intake and exhaust hardware. If it's SPFI, there's more wiring required, and I can't tell you how to do it... but someone else can. Either way, the original crossmember will be just fine. Link to comment Share on other sites More sharing options...
idosubaru Posted February 23, 2006 Author Share Posted February 23, 2006 Awesome! thanks guys, sounds good. The car and donor motor are both MPFI and 1987+. Original Car 1987.5 Turbo XT Donor is a complete MPFI XT 87.5 NON turbo one vote for a 2 wires disty that won't match and another vote says they will. guess i'll find out, that has to be resolvable. sounds like the swap should be fairly straight forward. no turbo stuff. i have the NA intake, still looking for an NA exhaust. I wanted that motor... hope you can snag another, i needed one. didn't have a motor for it at all. i was wondering if anyone here was considering it. Link to comment Share on other sites More sharing options...
TROGDOR! Posted February 23, 2006 Share Posted February 23, 2006 Gary, I did this exact same swap this fall. It's super easy, and the disty should plug right in. Everything you should need to know is in this thread: http://www.ultimatesubaru.org/forum/showthread.php?t=40961 That includes my report on what it took to do the job. A few things related to mounting the engine in place may be different on the XT, but all the electrical stuff will be identical. Link to comment Share on other sites More sharing options...
idosubaru Posted February 23, 2006 Author Share Posted February 23, 2006 awesome thanks for that link steve. i appreciate and printed it! what is an "L" series that you refer to? you mentioned you got an engine code after the swap, recall what that was? my donor motor doesn't have the a/c or alt on it, but appears to have the brackets. both being XT models (where yours was an XT to RX swap), maybe the alt and a/c will bolt in place? i'm converting it to XT6 electric power steering so no issue there. it has the crank pulley on it. i don't have the dogbone, i'll have to fabricate something for now. thanks for that heads up, i'll put an order in the parts wanted section. see how the throttle cable goes as well, that should be interesting. that might be my biggest concern at the moment. thanks again steve! here's a pic of the donor motor. Link to comment Share on other sites More sharing options...
TROGDOR! Posted February 23, 2006 Share Posted February 23, 2006 L-series refers to the sedan/wagon/coupe body. Since you're doing XT to XT, your original dogbone will be fine. Same goes for the belt driven accessories, just slap them on and go. Throttle cable will also be the same. Actually you won't have to change a thing besides the intake and exhaust hardware. P.S. - got any plans for the spider intake on your original turbo engine? Link to comment Share on other sites More sharing options...
idosubaru Posted February 23, 2006 Author Share Posted February 23, 2006 P.S. - got any plans for the spider intake on your original turbo engine? not at the moment, but i'd like to keep it for awhile in case i re-turbo the thing. i have another turbo block and a brand new EA82 block to put the turbo goodies in...so i'd like to hang onto it until i'm confident with the XT project. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now