Frank B Posted March 4, 2006 Share Posted March 4, 2006 What's the procedure for bench testing the EA82T TPS? Like resistance values. Link to comment Share on other sites More sharing options...
mbrickell Posted March 4, 2006 Share Posted March 4, 2006 Frank B said: What's the procedure for bench testing the EA82T TPS? Like resistance values. Section 2-7 of the online manual http://www.finleyweb.net/default.asp?id=142 Link to comment Share on other sites More sharing options...
Frank B Posted March 4, 2006 Author Share Posted March 4, 2006 THAT IS AWESOME! I have looked for an online manual for too long to admit! Thanks:headbang: Link to comment Share on other sites More sharing options...
mbrickell Posted March 4, 2006 Share Posted March 4, 2006 Frank B said: THAT IS AWESOME!I have looked for an online manual for too long to admit! Thanks:headbang: Have fun getting the TPS off. It is held on by two little screws, be careful not to drop them. I had to move the alternator and the AC compressor out of the way to get at the bottom screw. If I had a stubby small philips or an offset small philips, I might have been able to remove w/o the trouble. Not hard, just a pain. My Loyale has the alternator close to the TB, and the AC compressor toward the battery. If you have the opposite setup as mine, as some I've seen, where the AC compressor is on the TB side, harder to get at the TPS. Link to comment Share on other sites More sharing options...
subiemech85 Posted March 4, 2006 Share Posted March 4, 2006 you can also get to them with needle nose vise grips Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now