bridorf Posted March 4, 2006 Share Posted March 4, 2006 I suspect I have a bad TCU that is setting Duty C Solenoid faults like crazy and causing some weird torque bind issues. I have replaced the solenoid, twice, and the clutch pack, etc... I had some professionals take a stab at it and they couldn't figure it out since the problem is very sporadic, but I have had it set fault codes after clearing them and before even driving the car - as if the codes don't want to leave the TCU. A jumper was run from the TCU to the solenoid connection to rule out wiring in the harness between the two - and the only thing that hasn't been changed is the TCU itself - as a new one costs a mere $600 I haven't been prepared the buy one as a test unit yet. 1. Do TCUs fail occasionally on this model? 2. If you have replaced one before - what were the symptoms? Any help with this phantom electrical issue would be wonderful. Thanks Link to comment Share on other sites More sharing options...
lmdew Posted March 4, 2006 Share Posted March 4, 2006 I've got one from a auto to manual trans swap, $30 and its yours. Lmdew@hotmail.com Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now