Todd in Seattle Posted March 5, 2006 Share Posted March 5, 2006 Hey folks, I have a 91 Loyale that has some kind of aftermarket rear coilovers that lifts the back of my car about 2"-2.5" higher than stock Loyales. I was wondering if anyone sells just the front parts to the lift kits or does anyone have a drawing so i would make it myself? I am a machinist so that wont be a problem. I am also thinking about making an old-school pushbar out of 2.5" dia tubing, but I am having a hard time finding a place to mount it that loks structuraly strong enough to take a pull or a push if need be.. Thanks, todd in White Center aka west seattle Link to comment Share on other sites More sharing options...
El Toro Posted March 5, 2006 Share Posted March 5, 2006 do a search in off road, you should have good results there. Link to comment Share on other sites More sharing options...
Numbchux Posted March 5, 2006 Share Posted March 5, 2006 you could get adjustable front struts off an '85-'86 4WD EA82 GL, and some RX springs, That should level it out. But doing just a suspension lift on the front will be hard on the CV's. I don't think there's anyone who makes just a 2" or 2.5" lift, but I bet you could get one of them to make you some. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now