sasquatch Posted March 7, 2006 Share Posted March 7, 2006 I recently swapped out the climate control panel on my '90 Legacy. None of the buttons on my old one were doing anything (defrost, heat, vent, etc). They one I bought used didn't have quite the same wiring harness and the wires didn't have the same color coding. I was able to adapt in so that everything works EXCEPT the slider bar to control the air temperature now does nothing. The slider connects to a little cable and I can feel that is connected by grabing it where it snakes just under the glove box and pulling it, I can see the slider/temp control move....so, the cable is connected but even in the all the way "hot" position, nothing but really cold air............what the heck did I do? Help? Link to comment Share on other sites More sharing options...
sasquatch Posted March 7, 2006 Author Share Posted March 7, 2006 crap...I think I found my answer...when I was reconnecting the temperature control cable I don't think I put back that little clamp as it was a HUGE pain to get to.....ugh...I have to tear apart my dash again....Whaddaya think? Is that my culprit? Link to comment Share on other sites More sharing options...
Setright Posted March 7, 2006 Share Posted March 7, 2006 Yep, that's where I'd start. I had some trouble fitting that cable after replacing the bulbs. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now