7point62fmj Posted March 21, 2006 Share Posted March 21, 2006 I dont know if this has been talked about before but they can offer a in box roll bar. They only list it for the 80-81 brat. http://web.inetba.com/autoweld/rbc.ivnu They price ther 4 points at 152.00 Now I have a 87 brat. Is there a big diffrance in the box setup? I e-mailed them to see if they had one for a 87 and this was there reply. "We do not have specs for the '87 Brat. If you would download the form from our internet site and fill out the measurements we could make you one for your '87. When you tell us what point roll bar you want we can give you a price. Thanks." Now the issue is there download sheet looks like it is mainly for cages not roll bars that go in to the bed. Also it would help if you have a brat and could post a link or a pic of your brat's roll bar along with some rough measurments. Thanks Also I did a search so if you have a good link that may of escaped my eye post that to. Link to comment Share on other sites More sharing options...
75subie Posted March 21, 2006 Share Posted March 21, 2006 Great find! if only i could keep the 78 brat, i would be buying one, plus i could pick it up right in PA Link to comment Share on other sites More sharing options...
7point62fmj Posted March 21, 2006 Author Share Posted March 21, 2006 wow.. I have less then 100 post and I already found a small sources of dual carb intakes and and posssibly a sources for roll cages..I will not try to break my hand patting my self on the back. Now if I could just learn to spell:( Link to comment Share on other sites More sharing options...
redscab Posted March 22, 2006 Share Posted March 22, 2006 try these guys.... http://members.aol.com/SterlingEq/bar97.htm they have them for Gen2 Brats, but are pricier... Link to comment Share on other sites More sharing options...
baccaruda Posted March 22, 2006 Share Posted March 22, 2006 i pulled a roll bar out of a 4-runner that will fit nicely in the back of my EA82 wagon once I narrow it a couple inches... then i can finally have rear shoulder belts! Link to comment Share on other sites More sharing options...
rory Posted March 22, 2006 Share Posted March 22, 2006 i used to have a stearling brush bar and roll bar in my 86 brat...their stuff is heavy duty... i had to lift the brat about an 1 .5 after installing the push bar... Link to comment Share on other sites More sharing options...
7point62fmj Posted March 22, 2006 Author Share Posted March 22, 2006 The quesiton still stands is there a diffrance between a 80-81 brat box and a 87 brat? Link to comment Share on other sites More sharing options...
7point62fmj Posted March 26, 2006 Author Share Posted March 26, 2006 Some one has to know if the box sizes is diffrent between the two years? I know some of you have more Brats then you do children.. Link to comment Share on other sites More sharing options...
redscab Posted March 26, 2006 Share Posted March 26, 2006 Some one has to know if the box sizes is diffrent between the two years? I know some of you have more Brats then you do children.. yes, the Gen2 Brat bed is about 4" wider than the Gen1. However, for a OEM Gen1 rollbar, if you cut 2" off each back leg, they will fit into a Gen2 okay, just be a bit narrow. not sure how the fit would be affected with jump seats, but with your 87 it should work okay... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now