trooperjeep Posted October 21, 2003 Share Posted October 21, 2003 Hi All, I have a 92 Subaru Loyale wagon, auto, 4WD and the "check engine" light has been on since I got it back. I read the codes from the computer and it is an error code "35" which I think is the purge control valve. What is this valve for? Dose it affect MPG or preformance? Where is it located? How do I fix this? T.J. Link to comment Share on other sites More sharing options...
rallyruss Posted October 21, 2003 Share Posted October 21, 2003 the purge solinoid is for purging the vapors from the charcoal canister (can up in right front of car) folow the lines off the canister to see where the solioid is. I think its on the manifold. depending on what failed you could have diferent problems. check connections and all that but it probably is shorted out.:-\ Link to comment Share on other sites More sharing options...
trooperjeep Posted October 22, 2003 Author Share Posted October 22, 2003 Everything looks fine. How can I test the part itself? Any other ideas? Link to comment Share on other sites More sharing options...
calebz Posted October 22, 2003 Share Posted October 22, 2003 there a few few tests to be done.. one is checking resistance.. when unplugged, I believe it should read out right around 35-37 ohms(someone please correct me if I'm wrong) Link to comment Share on other sites More sharing options...
XSNRG Posted October 22, 2003 Share Posted October 22, 2003 EGR = 32-39 ohms PCS = under 100 ohms Provided by asavage via oregonloyale Link to comment Share on other sites More sharing options...
trooperjeep Posted October 22, 2003 Author Share Posted October 22, 2003 Do you want me to check the resistance on the "purge control valve"? Is that the little metal mushroom shaped object on top of the charcoal canister? T.J. Link to comment Share on other sites More sharing options...
rallyruss Posted October 22, 2003 Share Posted October 22, 2003 yes check resistance on the solinoid. I dont think its on the canister itself but I could be wrong. there are some better tests but resistance is easyest for most people. Link to comment Share on other sites More sharing options...
trooperjeep Posted October 28, 2003 Author Share Posted October 28, 2003 I checked the resistance on the "purge control valve" and "it's dead Jim." I even took it out and applied voltage directly to see if the solinoid would "click".... no luck. So... how hard is it to get a new one? Is thjs a dealer only item? Will it effect gas millage & performance? T.J. Link to comment Share on other sites More sharing options...
trooperjeep Posted October 28, 2003 Author Share Posted October 28, 2003 Any ideas? Link to comment Share on other sites More sharing options...
Holmes Posted October 28, 2003 Share Posted October 28, 2003 Do a search on the web for used subaru parts. Put in a couple of email parts requests and you should be able to find one. I found a tested used one for $20, but before I got around to ordering it , my hard drive took a dump. I'm not sure what place I got the quote from. The quotes I got on used ones ranged from $20-$45 if I remember correctly. Also, check out these threads - http://usmb.ultimatesubaru.org/forum/showthread.php?s=&threadid=3953 http://usmb.ultimatesubaru.org/forum/showthread.php?s=&threadid=4306&highlight=purge+solenoid If you buy from the dealer, try using the part number Asavage gives in his post (Subaru Part #14774AA101). It costs almost half as much as the original listed part. Link to comment Share on other sites More sharing options...
trooperjeep Posted November 2, 2003 Author Share Posted November 2, 2003 I took a 1 hour drive out to a country junk yard that has a few wrecked, old Subarus... I was able to get a Purge Control Valve off a 93 Loyale for only $15! That sure beats the dealer cost of $102! Now my 92 Loyale's check engine light is out and the engine also seems to run a little smoother as well. Hopefully this will imporve the gas millage to. The best part was that the junk yards "lot car" was an old 90 Loyale wagon that was tearing through the huge mud puddles and thick mud like it was nothing! I'm glas to see they can still take a beating after all these years! T.J. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now