Jump to content
Ultimate Subaru Message Board

Impreza engine in a Loyal?


FF1
 Share

Recommended Posts

you will need an 1/2" adapter plate to mate the EJ18 to the EA82 Tranny.

 

There is a ************load of info on the site about it. You will also need to weld the holes shut on a EA82 fly wheel and have new holes drilled to mate the Ej18 crank.

 

You'll need the wiring harness from the inside of the cab forward to the front bumper.

 

What else............... well those 3 will get your started. allied armament and a few other guys on the board sell the adapter plates

Link to comment
Share on other sites

thats exactly what i did, except for the whole turbo wagon part......please search, you have many questions and they have already been answered, you need not look anymore for the info. so what prompted you to want an EJ motor in your loyale?

 

 

~Josh~

Link to comment
Share on other sites

you will need an 1/2" adapter plate to mate the EJ18 to the EA82 Tranny.

 

There is a ************load of info on the site about it. You will also need to weld the holes shut on a EA82 fly wheel and have new holes drilled to mate the Ej18 crank.

 

You'll need the wiring harness from the inside of the cab forward to the front bumper.

 

What else............... well those 3 will get your started. allied armament and a few other guys on the board sell the adapter plates

 

EJ22 !!! he is talking about the 2,2 liter engine not the 1,8

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...