MachineAgeVictim Posted April 19, 2006 Author Share Posted April 19, 2006 any pictures of the solenoid? which side of the carb? would carb cleaner or Marvel's work like seafoam? Link to comment Share on other sites More sharing options...
Caboobaroo Posted April 20, 2006 Share Posted April 20, 2006 the solenoid will be sticking out of the front of the carb on the driver's side. Has two wires going to it but one goes to a ground on the carb IIRC. Its big, can't miss it. Link to comment Share on other sites More sharing options...
MachineAgeVictim Posted May 9, 2006 Author Share Posted May 9, 2006 Fixed the problem!!!! :headbang::headbang::headbang: so it was probably the points but I just changed the whole disty for an electric one and it is sweeeeeeettttttt, it pulls harder than it did before and with no hesitation or sputter now I can't wait for my 14"pug alloys and the 205/60s that are going on them, it's waaaaaaayyyyyy too easy to toast the fronts Link to comment Share on other sites More sharing options...
Caboobaroo Posted May 9, 2006 Share Posted May 9, 2006 Fixed the problem!!!! :headbang::headbang::headbang: so it was probably the points but I just changed the whole disty for an electric one and it is sweeeeeeettttttt, it pulls harder than it did before and with no hesitation or sputter now I can't wait for my 14"pug alloys and the 205/60s that are going on them, it's waaaaaaayyyyyy too easy to toast the fronts Now imagine it being RWD... My Brat was all over the road cause it had some power to it. Then I dropped the FE motor into it and there went the tires.... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now