josh long Posted October 23, 2003 Share Posted October 23, 2003 I have a 88 turbo wagon. I decided to put a cone filter on it today. As I started taking it apart I noticed it had a different air meter than the 88 RX I had. So after adding the filter, I pulled off the bottom 2 hoses from the wastegate and put on manual boost controller. First pull was 11psi !!!! I was stoked so I grabbed an old intercooler I had from a GVR4 and stuck that on too. Summary: It sounds good, 10psi is better than 7.5 and I now need a hood scoop. The best part is it cost me less than $50 bux. Josh The build date on my car was 06/88 Link to comment Share on other sites More sharing options...
josh long Posted October 25, 2003 Author Share Posted October 25, 2003 I weeded out about half the vacume lines today and capped the one I missed on the install. Up next is a catch can and no more burning oil. I am woking on getting a scoop. and I still need to beat up my cats . I was thinking about the power supply to the fuel pump. Any thoughts. Anybody in washington have any lines on injector cleaning? Josh who would have thought 10 psi felt so good. Link to comment Share on other sites More sharing options...
carfreak85 Posted October 25, 2003 Share Posted October 25, 2003 RC engeneering does a good job. dont know where they're located, but out of state for sure! not cheap eather, but i trust em! Link to comment Share on other sites More sharing options...
Myxalplyx Posted October 25, 2003 Share Posted October 25, 2003 Originally posted by carfreak85 RC engeneering does a good job. dont know where they're located, but out of state for sure! not cheap eather, but i trust em! Yep, they are $25.00 per injector. Don't send in your injector o-rings with your injectors. They are liable to keep them and not replace them with new ones. That happened to me once. L8Rs BTW: A guy mentioned this site on another site and said they had a fast turnaround. C&C Motorsports Automotive Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now