What the final gear ratio on a 95 Legacy LSI?

[subieman]

I did a search, but to much stuff to mill over right now. Anyone have the answer? I'm pulling a auto tranny out of a 95 legacy and transplanting it into a 90 legacy. The 90 has 4.11 rear end, I just wanted to make sure everything will match up.

 

Thanks,

Jeremy

[idosubaru]

there's a great post on this topic with a link to something like Rallispek or some other site with a DETAILED list....like every subaru ever made (not quite) listed. look for that link, unfortunately i don't recall exactly where it is but i found it not too long ago using the search and looking for final gear ratio.

[subieman]

Dang can't find it. I installed the tranny and I'm getting a lot of binding in the rear. So guess the ratios are not the same.

 

The transmission is from a 1995 Legacy LSI auto and it was put in a 90 Legacy L auto. There is a sticker on the rear diff of the 90 4.11 but no sticker on the 95... figures.....

[dmanaenk]

here you go

95 legacy is 3.90

95 outback is 4.11

[subieman]

Thanks, but according to that chart... its for the 5-speed manual. Or am I reading it wrong?

[subieman]

Haha.. oh boy.. this info is hard to find! went to Legacy Central and got a rude comment about searching. I have... but to no end.... oh well.. Since I do have binding I will change out the diff anyway and hope it fixes my problem.