SakoTGrimes Posted April 17, 2006 Share Posted April 17, 2006 Is it possible to rig a d/r 5 speed so that you can operate it with the little red button, so you have 2hi and 4 lo but no 4hi? Link to comment Share on other sites More sharing options...
NoahDL88 Posted April 17, 2006 Share Posted April 17, 2006 Sure its possible, but you'd be going into uncharted territory. I can't think of any reason you'd want to though, the lever works 100% of the time, theres no vacuum lines to break, or electronics to fail. Link to comment Share on other sites More sharing options...
operose Posted April 17, 2006 Share Posted April 17, 2006 NoahDL88 said: Sure its possible, but you'd be going into uncharted territory. I can't think of any reason you'd want to though, the lever works 100% of the time, theres no vacuum lines to break, or electronics to fail. +1 Link to comment Share on other sites More sharing options...
85Sub4WD Posted April 17, 2006 Share Posted April 17, 2006 It probably is possible, but the trick would be to figure out the linkage, and you HAVE to have the clutch depressed to go from hi-lo or back - I dont see an advantage to it tho, as the vacuum actuators for the pushbutton 4WD are sometimes hairy at best what WOULD have the potiential to be advantageous, would be to seperate the linkages entirely (the gear reduction for low range is mechanically independent of the 4WD) - so that you could do 2hi, 2lo, 4hi, 4lo - not shure what it would be good for, but it would be an awesome thing to play with Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now