BabyAidan Posted April 25, 2006 Share Posted April 25, 2006 I have the 2002 WRX 227hp. I found the following mod to the turbo and worndered if anybody can give me their advice on it. Step 1: look at the lower left hand cornor of your intercooler Step 2: just past it you will see a T where 3 hoses plug into Step 3: Unplug the hose that would be what the T stands on Step 4: After you unplug that hose you will realize that the hose is actully 2 hoses with a joiner in the middle. Step 5: Pull apart the two hoses and remove the connector from the hose still remaining attached to your car. Step 6: Tha hose that is still attached to your car just let it hang inside your engine. Thank you Rob Link to comment Share on other sites More sharing options...
Legacy777 Posted April 25, 2006 Share Posted April 25, 2006 I would highly recommend not doing this. If you don't know what you're modifying....don't modify it. It sounds like their telling you to remove one of the hose connections going to the solenoids/valves. What does this mod claim to do? Link to comment Share on other sites More sharing options...
BabyAidan Posted April 25, 2006 Author Share Posted April 25, 2006 Legacy777 said: I would highly recommend not doing this. If you don't know what you're modifying....don't modify it. It sounds like their telling you to remove one of the hose connections going to the solenoids/valves. What does this mod claim to do? 45 more horses Link to comment Share on other sites More sharing options...
Bmm001 Posted April 26, 2006 Share Posted April 26, 2006 I'm with legacy777; I'd want to know what I am unhooking If I were you. Chances are it's hooked that way for a good reason. Brian M. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now