Lazer Posted May 2, 2006 Share Posted May 2, 2006 I have an 92 2l turbo legacy engine (ej20t) without ecu/wiring harness Is it possible to use wiring harness and ecu from an ej22?? If so do I have to modify the harness? Thanks Link to comment Share on other sites More sharing options...
Dr. RX Posted May 2, 2006 Share Posted May 2, 2006 I have an 92 2l turbo legacy engine (ej20t) without ecu/wiring harness Is it possible to use wiring harness and ecu from an ej22?? If so do I have to modify the harness? Thanks I did something similar, I help a friend put an EJ20G into his Legacy Turbo. We only needed to add two wire to the ECU connector and make a new engine wiring harness for the coil on plug ignition. In you case, you'll need to get a wrirng diagram for both configurations, study them and see where they are the same and where they are different. You could possibly get it to run on a N/A ECU, but it wouldn't run very good. You will need to get an ECU to match the engine. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now