NorthWet Posted May 8, 2006 Share Posted May 8, 2006 I would look this up in my FSM... but it is out on loan at the moment and not easily accessible. So... The governor mechanicals on my wife's 3AT are shot (pinion bearings or gov drive gear need replacing), and I am trying to get it limping along as a semi-automatic: Remove governor driven-gear, lock the governor circuit in "D" and shift the selector for lower gears. This is until I replace the transmission on one of the 4 vehicles that I have that need it. (Probably no time until summer, and my wife really doesn't want to wait that long. ) What I need to know is: What is the hydraulic circuit routing through the governor assembly when the road speed is high enought to select the "D" range (35mph or so)? I have tried locking the valve assembly where I thought it should be at speed, gutting the valve assembly altogether (no restriction to flow exiting the valve), and sealing the 2 hydraulic circuit ports. None of these seem to work. I am beginning to think that rather than release pressure in the circuit (as I thought I remembered) it may need to route the pressure from one port to the other. Anybody out there know or have an FSM handy? Link to comment Share on other sites More sharing options...
Cougar Posted May 8, 2006 Share Posted May 8, 2006 I have a manual for a '88 model but I won't be home until Friday 5/12 to look at it. Link to comment Share on other sites More sharing options...
NorthWet Posted May 9, 2006 Author Share Posted May 9, 2006 Bump-a-roo... ... for anyone with an FSM closer/sooner than Cougar's... Link to comment Share on other sites More sharing options...
NorthWet Posted May 11, 2006 Author Share Posted May 11, 2006 Bump... Link to comment Share on other sites More sharing options...
Cougar Posted May 12, 2006 Share Posted May 12, 2006 I will get home today and see if I can find out some info for you NW. Link to comment Share on other sites More sharing options...
NorthWet Posted May 25, 2006 Author Share Posted May 25, 2006 bump Link to comment Share on other sites More sharing options...
Cougar Posted May 25, 2006 Share Posted May 25, 2006 I am out of town again Northwet. I will be back again after Tuesday and see what I can do on this. Sorry I didn't back to you before. Link to comment Share on other sites More sharing options...
hooziewhatsit Posted May 25, 2006 Share Posted May 25, 2006 If this is the picture you wanted, let me know, and I can get do a better quality scan later today if wanted. http://www.ultimatesubaru.org/photos/showphoto.php?photo=11200&cat=855 (edit: should be able to save the picture locally, and zoom in more if needed) Link to comment Share on other sites More sharing options...
NorthWet Posted May 25, 2006 Author Share Posted May 25, 2006 Thanks to both of you. I will grab/enlarge the diagram when I get some time at home... looks like I can get the info I need from it. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now