Tallica1 Posted May 10, 2006 Share Posted May 10, 2006 Hi guys, I have a 1997 (MY98) V4 Subaru STi and want to get some aftermarket extractors for more power, also ones that really make the subaru rumble stand out. I have heard the Coby and Lukey ones do a great job in those area's, but thought I'd get your opinion's??? Cheers Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted May 10, 2006 Share Posted May 10, 2006 Hi guys, I have a 1997 (MY98) V4 Subaru STi and want to get some aftermarket extractors for more power, also ones that really make the subaru rumble stand out. I have heard the Coby and Lukey ones do a great job in those area's, but thought I'd get your opinion's??? Cheers Please translate from Kiwi to Yank. (I'm guessing headers) Carl Link to comment Share on other sites More sharing options...
Tallica1 Posted May 10, 2006 Author Share Posted May 10, 2006 Please translate from Kiwi to Yank. (I'm guessing headers) Carl Haha yeah headers in other words mate! Link to comment Share on other sites More sharing options...
Setright Posted May 10, 2006 Share Posted May 10, 2006 Factory headers aren't all that bad. And with the turbo pulling gases out, the gains here aren't going to be massive. Better to look behind the turbo, especially the flange that looks nice and wide from outside, but is really just a small pipe in a big flange. A good turbo-back system can give you 25-30 bhp more along with less lag. Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted May 10, 2006 Share Posted May 10, 2006 Haha yeah headers in other words mate! Enjoy a 'cold tube' and cruise the exhaust reviews at http://www.subarureview.com/engine.php?PHPSESSID=59da332400b5149a2d74e1ab1c566fec Cusco, Borla, Gruppe-S and others offer headers, but I think a full header back - with possibly having the stock turbo 'ported' would be a better use of funds. Some folks have experienced 'cracks at the Y' (no - not THAT crack at the Y!) and heat problems with aftermarket headers. I dunno. I've read you will want OVER 3 inch dia. over 300hp - I dunno what dia. you have stock. So you may as well start with header back first. Then see where the best place to spend the next funds would be. You might also do some searching/reading/posting in the appropriate forums at www.nasioc.com - those guys are a huge database for performance mods. Carl Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now