raulcruz01@earthlink.net Posted May 11, 2006 Share Posted May 11, 2006 rear brakes, that is. He said he bled the brakes, but the brakes feel mushy to me, like there's more play in them, like they reach closer to the floorboard. He's gone for a month and I'm wondering if there's something I need to do to firm them up or if I even need to do it (if they're fine the way they are). I've done brakes before, and though I'm no pro, I think I'm knowledgeable enough to get back in there and tweak something if it's relatively simple. Thanks for your help guys! BTW, it's a 96 outback wagon, 2.2 manual tranny Link to comment Share on other sites More sharing options...
fishy Posted May 11, 2006 Share Posted May 11, 2006 As long as it feels like he didn't leave out a pad or something it probably just needs another bleeding. If I remember correctly it should be bled from the furthest corner from the master cylinder and then 2nd furthest and so on. Link to comment Share on other sites More sharing options...
RallyKeith Posted May 11, 2006 Share Posted May 11, 2006 Disc or Drum in the Rear???? Sounds like it's probably Drum and he left them adjusted too loose. Link to comment Share on other sites More sharing options...
fnlyfnd Posted May 11, 2006 Share Posted May 11, 2006 96 obw is disc brakes all round. Just bleed them again. There is a special(abnormal) way to bleed these since its a diagonal braking system. Link to comment Share on other sites More sharing options...
raulcruz01@earthlink.net Posted May 11, 2006 Author Share Posted May 11, 2006 Can someone give me a step-by-step on how to bleed the brakes? BTW, they are disc brakes and I'm sure he didn't forget a pad Link to comment Share on other sites More sharing options...
dmanaenk Posted May 11, 2006 Share Posted May 11, 2006 This is from 99' Legacy FSM. You can get the whole thing if you search the board. Btw: Did you friend bleed only rear brakes? At least that's how I read your post... MSA5TCD99L296.pdf Link to comment Share on other sites More sharing options...
Gnuman Posted May 12, 2006 Share Posted May 12, 2006 OK, I just have to say this. Does anyone else find the title of this thread to be incredibly scary? I shudder every time I read (or hear) those words. . . Link to comment Share on other sites More sharing options...
idosubaru Posted May 12, 2006 Share Posted May 12, 2006 it would be nice to know why the brake fluid lines were opened and needed bleeding? replacing the rotors and pads does not require bleeding, so i'm wondering what else was wrong that necessitated the opening of the lines? i'd vote for bleeding them again as well. lots of tips on the board here for doing that. i've had a few times when the brake pedal feels like it's going lower and then it firms up after a couple times of pushing it in. don't know why, i always assumed the pads needed to seat fully and the pistons needed to come out of the bore after being pushed in to receive the new pads. this would only be applicable if the pads were replaced after bleeding. have you driven it much? if the pistons in the calipers were pressed back in without the brake master cyilnder cap being removed, this can damage the master cylinder. or you could just have master cylinder problems. Link to comment Share on other sites More sharing options...
2X2KOB Posted May 12, 2006 Share Posted May 12, 2006 OK, I just have to say this. Does anyone else find the title of this thread to be incredibly scary? Not really. Lots of people do their own brakes. Also, lots of morons get paid to do brakes! It ain't rocket surgery. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now