Jump to content
Ultimate Subaru Message Board

seafoam ea82 help


Recommended Posts

there is round black canster ,with 3 black hoses , if i remember it is the bigger of the 2 , start car , pull hose and put it into seafoam can let it suck into the motor , + pour some into carb or spfi ,but not to much , then put the rest into the gas tank , there might be a few other vacuum hoses ,

Link to comment
Share on other sites

YEah, find the big black round canister at the front passenger side of your car, inside the engine bay. There will be a few hoses plugged into the top of it. Find one that leads directly to the intake manifold. Stick that hose into the can and let it suck in about 1/4 of the bottle of seafoam.

 

Have your hand on the throttle and blip it a couple times... the seafoam will try to kill your engine. Let the engine revive itself, and then keep it up. After 1/4 of the can is gone, drive the car alittle.... then do it again.

 

Pour the other 1/2 of the can into your gas tank. Make sure you have less than 1/3-1/4 tank of fuel... then drive the car the rest of the week until its on E.

 

Fill up, and have fun.

 

-Brian

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...