michlcamp Posted May 26, 2006 Share Posted May 26, 2006 Working on my son's '89 XT - rear brake lines are rusted through where they come down from under the back seat - after I took out the back seat I see that they run from there all the way to the front of the car (I haven't looked to see where they hook up - I'm assuming the master cylinder) - I haven't taken the bad lines out yet. Can anyone tell me tonight how long these lines are (5-6 feet?) and the size of the threaded fittings (10mm?) - I either have to replace the whole line from front to back or piece in a couple of new "patch" lines (doubleflared of course) - if I can find out tonight I can buy them instead of make them and don't have to drive 20 miles to get the old ones off first, or if replacing the whole line is a lot more trouble, please advise.. Also wish I could find those specs or a diagram somewhere. thanks in advance.. mc Link to comment Share on other sites More sharing options...
jeffast Posted May 26, 2006 Share Posted May 26, 2006 try this website xt's only www.xt6.net Link to comment Share on other sites More sharing options...
ShawnW Posted May 26, 2006 Share Posted May 26, 2006 If braided lines are available I would go that route. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now