LiftedHatchSubie Posted May 28, 2006 Share Posted May 28, 2006 Link to comment Share on other sites More sharing options...
operose Posted May 28, 2006 Share Posted May 28, 2006 those track setups add a lot of weight though I think... one thing I like about wheeling soobs is the weight (or lack thereof) Link to comment Share on other sites More sharing options...
Turbone Posted May 28, 2006 Share Posted May 28, 2006 That Hatch is mine now, and I would NEVER put those anchors on my car:mad: The way its setup now, I wouldnt be surprised if it can go more places than with those tracks. Link to comment Share on other sites More sharing options...
Andyjo Posted May 28, 2006 Share Posted May 28, 2006 I dunno... i've seen some crazy stuff w/ tracks before... Derrick, the Parishville rescue squad has a 4wheeler.... with mattracks on it, and it's rediculous the stuff they do w/ it they also have a gear reduction in them i believe... so you even lower range Link to comment Share on other sites More sharing options...
GeneralDisorder Posted May 28, 2006 Share Posted May 28, 2006 They suck in Mud, and water. Good for sand, snow, etc. Useless for rock crawling, or racing (no good for high speed). And you need an almost limitless power pack to turn them effectively (V8's and V10's are good) Oh - by all means try it out - you'll need some investors to fork out the $25,000 for a set. The problem is they have very bad aproach angles to them. They are mostly designed to spread the weight of the vehicle on highly unstable sufaces. They are excelent for what they were designed for - snow mostly. Some folks use them in sand, but really that just chews the heck out of them. If this was such a great system, you would see the army putting them on H1's. Why do you suppose they got rid of the halftrack? Couple reasons - unreliable, too slow, too heavy, and just plain not as effective for varried terrain. Heck - even our armored personel carriers are wheeled now. We still have a few tracked small vehicles - mostly for arctic equipped units tho. (Tanks are another story - much like a dozer, 46 tons of DU plate and 150mm cannon are just too much for anything inflatable..... they aren't unstoppable - they get stuck quite a bit..... and BOY is that a mess ) GD Link to comment Share on other sites More sharing options...
baccaruda Posted May 28, 2006 Share Posted May 28, 2006 that'd be fun with dual EJ22s. Link to comment Share on other sites More sharing options...
Crown Loyale Posted May 28, 2006 Share Posted May 28, 2006 What about the ones they make for ATV's? They aren't as tall and heavy as the truck ones. I saw a polairs ranger 6X6 with tracks follow an argo with tracks through some thick stuff, no water, up here in AK. These might work but what do I know, I still have a stock Loyale wagon with 25" tires on it with a 3sp. Link to comment Share on other sites More sharing options...
LiftedHatchSubie Posted May 28, 2006 Author Share Posted May 28, 2006 These trax can go anywhere...check out the site. http://www.mattracks.com/html/105_series_.htm As for bad approach...check out the video titled "Rough Terrain":grin: http://www.mattracks.com/html/video_clips.htm I've been reading up on this company and thier products...I think they'd be awsome for a subaru. ~~Lucas Link to comment Share on other sites More sharing options...
Andyjo Posted May 28, 2006 Share Posted May 28, 2006 Wow.. i just watched all of those videos, good stuff! for those who say they don't do a good job.. you should watch those movies!! yeah.. .the trucks have ALOT of power to give.. but yeah... good stuff Link to comment Share on other sites More sharing options...
SuBrat84 Posted May 28, 2006 Share Posted May 28, 2006 too bad the smallest ones for "trucks" add 1300 pounds to your vehicle. The "Litefoot" for atvs would be nice to adapt to a Subaru, I think. With a weight of ~100 pounds per track, they wouldn't be too heavy. However, with a Recommended Max. GVW of 2,500 pounds.. it might not be strong enough, unless you use some weight reduction techniques? And with a ~max speed of 40 mph.. you could probably crawl just about anywhere in low range. I can see pros and cons.. definately a lot more beneficial if you lived in snow etc.. Edit: You know you wish you could drive up a 22" curb or over a 12" round log (telephone pole) Edit #2: I had to do this... You know you love it: Link to comment Share on other sites More sharing options...
monstaru Posted May 28, 2006 Share Posted May 28, 2006 i got a quote from mattracks last year to make some for my brat........and i am not down for selling my house to make it happen.and by the way an average set of those in our size would be around 14,000 if they already produced them. Link to comment Share on other sites More sharing options...
LosDiosDeVerde86 Posted May 28, 2006 Share Posted May 28, 2006 the funny thing is that it's probably dirt cheap to make them too Link to comment Share on other sites More sharing options...
SuBrat84 Posted May 28, 2006 Share Posted May 28, 2006 Makes me wish I had a machine shop. Link to comment Share on other sites More sharing options...
LosDiosDeVerde86 Posted May 29, 2006 Share Posted May 29, 2006 Makes me wish I had a machine shop. everything's cheap if you have a machine shop i'd have so many lightweight things that you can't buy in stores. Link to comment Share on other sites More sharing options...
Phizinza Posted May 29, 2006 Share Posted May 29, 2006 everything's cheap if you have a machine shop ... Everythings cheap, except for a machine shop ! Link to comment Share on other sites More sharing options...
Andyjo Posted May 29, 2006 Share Posted May 29, 2006 ... Everythings cheap, except for a machine shop ! And the material to build stuff! Link to comment Share on other sites More sharing options...
Phizinza Posted May 29, 2006 Share Posted May 29, 2006 And the material to build stuff! So we're trying to say.... nothing is cheap? Link to comment Share on other sites More sharing options...
soobmater Posted May 29, 2006 Share Posted May 29, 2006 So we're trying to say.... nothing is cheap? Haha pretty much Link to comment Share on other sites More sharing options...
Numbchux Posted May 29, 2006 Share Posted May 29, 2006 Mattracks is based out of northern MN. I've seen many vehicles with those equipped on them running offroad. They actually have a pretty serious 'gear' reduction to them. That's why they don't do so hot in mud, they need to be moving faster than that, they also don't exactly have an MT design to them. And because of their upper size, they can have the effect of big tires, without needing the fender clearance. these would actually be perfect for a trail-only subaru. but because they're not streetable, and they don't make them for a subaru, they just don't make sense. GD....I'm interested in where you got your info....sounds like you know what you're talking about, but it completely contradicts what I've seen and heard Link to comment Share on other sites More sharing options...
wallaceg Posted May 30, 2006 Share Posted May 30, 2006 http://www.litefootatv.com/html/new_litefoot_m3.htm#M3 ATV tracks with a GVWR of 3500 lbs. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now