Operation Mad Max

[7point62fmj]

In my quest to make the Brat look like the remains of ww III. I figured I would start this thread and updated it as I get things done.

part 1

Rust proofing and hole pluging.

Rust proofing with this

http://rustbullet.com/Products/Automotive/Automotive.htm

nice stuff it is a brushable powder coating. 1 Gallon covers 200sq ft

hole filling with this

http://www.por15.com/PRODUCTS/PUTTYFILLERSSEALERS/EPOXYPUTTY/tabid/87/Default.aspx

This stuff has some wicked tensil strength you can even tap it and put screws in it.

Then I will cover it with this

http://www.cabelas.com/cabelas/en/templates/links/link.jsp?id=0021475016662a&type=product&cmCat=search&returnPage=search-results1.jsp&QueryText=tuff+coat&N=4887&Ntk=Products&Ntx=mode+matchall&Nty=1&Ntt=tuff+coat&noImage=0

 

I will be trimming fenders and putting on flares.

More to come.

 

---pics below--

 

I still have one more coat of rust bullet to put on this spot. It has to be 3 mils thick . I only bought the sampler kit The one gallon pail is in the mail.

[gunslinger]

seems to me that remains from wwII WOULD have rust, holes and look like its falling apart.

 

mad max rigs would too. i doubt POR15 would be available at the thunderdome supermall.

[970subaru]

first, put a eaton M62 on top of your motor

then, make new fenders, one out of metal roofing and one out of a chevy corsica fender

14 bolt dually rear axle with the dually wheels, mismatched tires of course

dash mounted elephant rifle(no windshield)

bed mounted M60

[7point62fmj]

I am thinking more along the lines of one of the chase cars. Now if I can only get master blaster to sit in the back.. Oh well back to work.