Uberoo Posted June 8, 2006 Share Posted June 8, 2006 just secure that spare tire and you will be golden. Link to comment Share on other sites More sharing options...
LosDiosDeVerde86 Posted June 8, 2006 Share Posted June 8, 2006 i think the funny part is that i did the same thing before i got to your post. but in slow motion. http://24.131.74.107/jump.html Link to comment Share on other sites More sharing options...
Andyjo Posted June 9, 2006 Share Posted June 9, 2006 i think the funny part is that i did the same thing before i got to your post. but in slow motion. http://24.131.74.107/jump.html you flash nerd :-p it's funny.. you can see the passenger's arm tenseing up when they bounce now i'm going to have to go make it do a flip or something Link to comment Share on other sites More sharing options...
thesubarukid Posted June 9, 2006 Share Posted June 9, 2006 back to the tire problem on the roof, well its a wagon right? about about putting that tire in the back Link to comment Share on other sites More sharing options...
BruceyWV Posted June 9, 2006 Share Posted June 9, 2006 That worked fine for me. I eventually got smart, and found if I could air the spare down to 15 psi I could just barely squeeze it in the donut slot. No more goofy FWD fuse! I jumped my old camry once by accident, there was a broken warning sign that I didnt think anything of. For a railroad crossing. It humped up for the railroad then came back down immediately, I bottomed the front end out, the recoil then went to the back and it bottomed it out, then there was still enough force for the front to bottom out again. Pay attention if there is a pole in the middle of now where folks! Link to comment Share on other sites More sharing options...
MachineAgeVictim Posted June 9, 2006 Author Share Posted June 9, 2006 the gen 1 wagon is pretty small, about the size of a gen 2 hatch, if I had more room then it wouldn't be in the way when I'm hauling stuff I'd like to get a swing arm to mount it to but I'd have to mount the plate on the wheel because there isn't enough room between the tail light and the plate for the wheel Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now