Nug Posted June 13, 2006 Share Posted June 13, 2006 I need to know if a 3at pushbutton 4wd out of an '85 EA82 car is a direct swap for the 3at pushbutton 4wd out of a '84 EA81 car. I'm 90% sure they are the same animal. Link to comment Share on other sites More sharing options...
Nug Posted June 13, 2006 Author Share Posted June 13, 2006 Bump Link to comment Share on other sites More sharing options...
Turbone Posted June 13, 2006 Share Posted June 13, 2006 I believe the only thing different is the tranny mounts. Altho thinking about it, the TC might be different also. Link to comment Share on other sites More sharing options...
Nug Posted June 13, 2006 Author Share Posted June 13, 2006 How different? The donor car is locked up, not sure if I will be able to get the TC off of the flexplate. Link to comment Share on other sites More sharing options...
Caboobaroo Posted June 13, 2006 Share Posted June 13, 2006 I think what Rob means is the TC are different for the cars. Your TC on the tranny you have now should slide right onto the input splines and have no issues. I believe its all internal on the TC. Link to comment Share on other sites More sharing options...
GLCraig Posted June 14, 2006 Share Posted June 14, 2006 The Tail housing and rear output shaft on the EA81 version are longer then the ones on a EA82, similar to how a D/R 4 speed is longer then a D/R 5 speed. I have had a couple of dozen 3ATs apart and those parts can be swapped fairly easly; you will need to make sure that you keep transfer gear set matched up. Link to comment Share on other sites More sharing options...
Nug Posted June 15, 2006 Author Share Posted June 15, 2006 I'm going to GravelRx's house on Sunday to retrieve the trans in question. It sounds like it will work, with just a bit of effort. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now